Frames and coverage
Results
All (6)
All (6) ((6 results))
- Articles and reports: 12-001-X20020016419Description:
Since some individuals in a population may lack telephones, telephone surveys using random digit dialling within strata may result in asymptotically biased estimators of ratios. The impact from not being able to sample the non-telephone population is examined. We take into account the propensity that a household owns a telephone, when proposing a post-stratified telephone-weighted estimator, which seems to perform better than the typical post-stratified estimator in terms of mean squared error. Such coverage propensities are estimated using the Public Use Microdata Samples, as provided by the United States Census. Non-post-stratified estimators are considered when sample sizes are small. The asymptotic mean squared error, along with its estimate based on a sample of each of the estimators is derived. Real examples are analysed using the Public Use Microdata Samples. Other forms of no-nresponse are not examined herein.
Release date: 2002-07-05 - Articles and reports: 12-001-X19980024353Description:
This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.
Release date: 1999-01-14 - Articles and reports: 12-001-X19980013913Description:
Temporary mobility is hypothesized to contribute toward within-household coverage error since it may affect an individual's determination of "usual residence" - a concept commonly applied when listing persons as part of a household-based survey or census. This paper explores a typology of temporary mobility patterns and how they relate to the identification of usual residence. Temporary mobility is defined by the pattern of movement away from, but usually back to a single residence over a two-three month reference period. The typology is constructed using two dimensions: the variety of places visited and the frequency of visits made. Using data from the U.S. Living Situation Survey (LSS) conducted in 1993, four types of temporary mobility patterns are identified. In particular, two groups exhibiting patterns of repeat visit behavior were found to contain more of the types of people who tend to be missed during censuses and surveys. Log-linear modeling indicates spent away and demographic characteristics.
Release date: 1998-07-31 - Articles and reports: 12-001-X199400214426Description:
In the MARS Project (Monitoring Agriculture with Remote Sensing) of the E.C. (European Community), area frames based on a square grid are used for area estimation through ground surveys and high resolution satellite images. These satellite images are useful, though expensive, for area estimation: their use for yield estimation is not yet operational. To fill this gap the sample elements (segments) of the area survey are used as well for sampling farms with a template of points overlaid on the segment. Most often we use a fixed number of points per segment. Farmers are asked to provide global data for the farm, and estimates are computed with a Horvitz-Thompson approach. Major problems include locating farmers and checking for misunderstanding of instructions. Good results are obtained for area and for production of the main crops. Area frames need to be complemented with list frames (multiple frames) to give reliable estimates for livestock.
Release date: 1994-12-15 - 5. Reverse record check: Tracing people in Canada ArchivedArticles and reports: 12-001-X198000154835Description:
The Reverse Record Check is the main vehicle used to assess the level of undercoverage in the Canadian Census of Population. A sample of persons is selected from sources independent of the current census and extensive tracing operations are undertaken to determine the usual address of each selected person as of Census day. Census records are then checked to determine whether or not each selected person was enumerated. The tracing is by far the most complex, costly and time-consuming operation associated with this study. It involves extensive use of administrative records as well as tracing in the field. This paper describes the various tracing methods used as well as the success obtained from each of them.
Release date: 1980-06-16 - Articles and reports: 12-001-X197800254834Description: Frames designed for continuous surveys are sometimes used for ad hoc surveys which require selection of sampling units separate from those selected for the continuous survey. This paper presents an unbiased extension of Keyfitz’s (1951) sample updating method to the case where a portion of the frame has been reserved for surveys other than the main continuous survey. A simple although biased alternative is presented. The scope under Platek and Singh’s (1975) design strategy for an area based continuous survey requiring updating is then expanded to encompass rotation of first stage units, establishment of a separate special survey sub-frame, and procedures to prevent re-selection of ultimate sampling units. The methods are evaluated in a Monte Carlo study using Census data to simulate the design for the Canadian Labour Force Survey.Release date: 1978-12-15
Data (0)
Data (0) (0 results)
No content available at this time.
Analysis (6)
Analysis (6) ((6 results))
- Articles and reports: 12-001-X20020016419Description:
Since some individuals in a population may lack telephones, telephone surveys using random digit dialling within strata may result in asymptotically biased estimators of ratios. The impact from not being able to sample the non-telephone population is examined. We take into account the propensity that a household owns a telephone, when proposing a post-stratified telephone-weighted estimator, which seems to perform better than the typical post-stratified estimator in terms of mean squared error. Such coverage propensities are estimated using the Public Use Microdata Samples, as provided by the United States Census. Non-post-stratified estimators are considered when sample sizes are small. The asymptotic mean squared error, along with its estimate based on a sample of each of the estimators is derived. Real examples are analysed using the Public Use Microdata Samples. Other forms of no-nresponse are not examined herein.
Release date: 2002-07-05 - Articles and reports: 12-001-X19980024353Description:
This paper studies response errors in the Current Population Survey of the U.S. Bureau of the Census and assesses their impact on the unemployment rates published by the Bureau of Labour Statistics. The measurement of these error rates is obtained from reinterview data, using an extension of the Hui and Walter (1980) procedure for the evaluation of diagnostic tests. Unlike prior studies which assumed that the reconciled reinterview yields the true status, the method estimates the error rates in both interviews. Using these estimated error rates, we show that the misclassification in the original survey creates a cyclical effect on the reported estimated unemployment rates. In particular, the degress of underestimation increases when true unemployment is high. As there was insufficient data to distinguish between a model assuming that the misclassification rates are the same throughout the business cycle, and one that allows the error rates to differ in periods of low, moderate and high unemployment, our findings should be regarded as preliminary. Nonetheless, they indicated that the relationship between the models used to assess the accuracy of diagnostic tests, and those measuring misclassification rates of survey data, deserves further study.
Release date: 1999-01-14 - Articles and reports: 12-001-X19980013913Description:
Temporary mobility is hypothesized to contribute toward within-household coverage error since it may affect an individual's determination of "usual residence" - a concept commonly applied when listing persons as part of a household-based survey or census. This paper explores a typology of temporary mobility patterns and how they relate to the identification of usual residence. Temporary mobility is defined by the pattern of movement away from, but usually back to a single residence over a two-three month reference period. The typology is constructed using two dimensions: the variety of places visited and the frequency of visits made. Using data from the U.S. Living Situation Survey (LSS) conducted in 1993, four types of temporary mobility patterns are identified. In particular, two groups exhibiting patterns of repeat visit behavior were found to contain more of the types of people who tend to be missed during censuses and surveys. Log-linear modeling indicates spent away and demographic characteristics.
Release date: 1998-07-31 - Articles and reports: 12-001-X199400214426Description:
In the MARS Project (Monitoring Agriculture with Remote Sensing) of the E.C. (European Community), area frames based on a square grid are used for area estimation through ground surveys and high resolution satellite images. These satellite images are useful, though expensive, for area estimation: their use for yield estimation is not yet operational. To fill this gap the sample elements (segments) of the area survey are used as well for sampling farms with a template of points overlaid on the segment. Most often we use a fixed number of points per segment. Farmers are asked to provide global data for the farm, and estimates are computed with a Horvitz-Thompson approach. Major problems include locating farmers and checking for misunderstanding of instructions. Good results are obtained for area and for production of the main crops. Area frames need to be complemented with list frames (multiple frames) to give reliable estimates for livestock.
Release date: 1994-12-15 - 5. Reverse record check: Tracing people in Canada ArchivedArticles and reports: 12-001-X198000154835Description:
The Reverse Record Check is the main vehicle used to assess the level of undercoverage in the Canadian Census of Population. A sample of persons is selected from sources independent of the current census and extensive tracing operations are undertaken to determine the usual address of each selected person as of Census day. Census records are then checked to determine whether or not each selected person was enumerated. The tracing is by far the most complex, costly and time-consuming operation associated with this study. It involves extensive use of administrative records as well as tracing in the field. This paper describes the various tracing methods used as well as the success obtained from each of them.
Release date: 1980-06-16 - Articles and reports: 12-001-X197800254834Description: Frames designed for continuous surveys are sometimes used for ad hoc surveys which require selection of sampling units separate from those selected for the continuous survey. This paper presents an unbiased extension of Keyfitz’s (1951) sample updating method to the case where a portion of the frame has been reserved for surveys other than the main continuous survey. A simple although biased alternative is presented. The scope under Platek and Singh’s (1975) design strategy for an area based continuous survey requiring updating is then expanded to encompass rotation of first stage units, establishment of a separate special survey sub-frame, and procedures to prevent re-selection of ultimate sampling units. The methods are evaluated in a Monte Carlo study using Census data to simulate the design for the Canadian Labour Force Survey.Release date: 1978-12-15
Reference (0)
Reference (0) (0 results)
No content available at this time.
- Date modified: