Inference and foundations

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Type

2 facets displayed. 0 facets selected.

Geography

1 facets displayed. 0 facets selected.

Survey or statistical program

1 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (8)

All (8) ((8 results))

  • Articles and reports: 12-001-X202200100009
    Description:

    In finite population estimation, the inverse probability or Horvitz-Thompson estimator is a basic tool. Even when auxiliary information is available to model the variable of interest, it is still used to estimate the model error. Here, the inverse probability estimator is generalized by introducing a positive definite matrix. The usual inverse probability estimator is a special case of the generalized estimator, where the positive definite matrix is the identity matrix. Since calibration estimation seeks weights that are close to the inverse probability weights, it too can be generalized by seeking weights that are close to those of the generalized inverse probability estimator. Calibration is known to be optimal, in the sense that it asymptotically attains the Godambe-Joshi lower bound. That lower bound has been derived under a model where no correlation is present. This too, can be generalized to allow for correlation. With the correct choice of the positive definite matrix that generalizes the calibration estimators, this generalized lower bound can be asymptotically attained. There is often no closed-form formula for the generalized estimators. However, simple explicit examples are given here to illustrate how the generalized estimators take advantage of the correlation. This simplicity is achieved here, by assuming a correlation of one between some population units. Those simple estimators can still be useful, even if the correlation is smaller than one. Simulation results are used to compare the generalized estimators to the ordinary estimators.

    Release date: 2022-06-21

  • Articles and reports: 11-522-X201700014759
    Description:

    Many of the challenges and opportunities of modern data science have to do with dynamic aspects: evolving populations, the growing volume of administrative and commercial data on individuals and establishments, continuous flows of data and the capacity to analyze and summarize them in real time, and the deterioration of data absent the resources to maintain them. With its emphasis on data quality and supportable results, the domain of Official Statistics is ideal for highlighting statistical and data science issues in a variety of contexts. The messages of the talk include the importance of population frames and their maintenance; the potential for use of multi-frame methods and linkages; how the use of large scale non-survey data as auxiliary information shapes the objects of inference; the complexity of models for large data sets; the importance of recursive methods and regularization; and the benefits of sophisticated data visualization tools in capturing change.

    Release date: 2016-03-24

  • Articles and reports: 82-003-X201300611796
    Geography: Canada
    Description:

    The study assesses the feasibility of using statistical modelling techniques to fill information gaps related to risk factors, specifically, smoking status, in linked long-form census data.

    Release date: 2013-06-19

  • Articles and reports: 11F0024M20050008805
    Description:

    This paper reports on the potential development of sub-annual indicators for selected service industries using Goods and Services Tax (GST) data. The services sector is now of central importance to advanced economies; however, our knowledge of this sector remains incomplete, partly due to a lack of data. The Voorburg Group on Service Statistics has been meeting for almost twenty years to develop and incorporate better measures for the services sector. Despite this effort, many sub-annual economic measures continue to rely on output data for the goods-producing sector and, with the exception of distributive trades, on employment data for service industries.

    The development of sub-annual indicators for service industries raises two questions regarding the national statistical program. First, is there a need for service output indicators to supplement existing sub-annual measures? And second, what service industries are the most promising for development? The paper begins by reviewing the importance of service industries and how they behave during economic downturns. Next, it examines considerations in determining which service industries to select as GST-based, sub-annual indicators. A case study of the accommodation services industry serves to illustrate improving timeliness and accuracy. We conclude by discussing the opportunities for, and limitations of, these indicators.

    Release date: 2005-10-20

  • Articles and reports: 11-522-X20020016731
    Description:

    Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.

    Release date: 2004-09-13

  • Articles and reports: 62F0014M1998013
    Geography: Canada
    Description:

    The reference population for the Consumer Price Index (CPI) has been represented, since the 1992 updating of the basket of goods and services, by families and unattached individuals living in private urban or rural households. The official CPI is a measure of the average percentage change over time in the cost of a fixed basket of goods and services purchased by Canadian consumers.

    Because of the broadly defined target population of the CPI, the measure has been criticised for failing to reflect the inflationary experiences of certain socio-economic groups. This study examines this question for three sub-groups of the reference population of the CPI. It is an extension of earlier studies on the subject done at Statistics Canada.

    In this document, analytical consumer price indexes sub-group indexes are compared to the analytical index for the whole population calculated at the national geographic level.

    The findings tend to point to those of earlier Statistics Canada studies on sub-groups in the CPI reference population. Those studies have consistently concluded that a consumer price index established for a given sub-group does not differ substantially from the index for the whole reference population.

    Release date: 1999-05-13

  • Geographic files and documentation: 92F0138M1993001
    Geography: Canada
    Description:

    The Geography Divisions of Statistics Canada and the U.S. Bureau of the Census have commenced a cooperative research program in order to foster an improved and expanded perspective on geographic areas and their relevance. One of the major objectives is to determine a common geographic area to form a geostatistical basis for cross-border research, analysis and mapping.

    This report, which represents the first stage of the research, provides a list of comparable pairs of Canadian and U.S. standard geographic areas based on current definitions. Statistics Canada and the U.S. Bureau of the Census have two basic types of standard geographic entities: legislative/administrative areas (called "legal" entities in the U.S.) and statistical areas.

    The preliminary pairing of geographic areas are based on face-value definitions only. The definitions are based on the June 4, 1991 Census of Population and Housing for Canada and the April 1, 1990 Census of Population and Housing for the U.S.A. The important aspect is the overall conceptual comparability, not the precise numerical thresholds used for delineating the areas.

    Data users should use this report as a general guide to compare the census geographic areas of Canada and the United States, and should be aware that differences in settlement patterns and population levels preclude a precise one-to-one relationship between conceptually similar areas. The geographic areas compared in this report provide a framework for further empirical research and analysis.

    Release date: 1999-03-05

  • Articles and reports: 12-001-X198900214568
    Description:

    The paper describes a Monte Carlo study of simultaneous confidence interval procedures for k > 2 proportions, under a model of two-stage cluster sampling. The procedures investigated include: (i) standard multinomial intervals; (ii) Scheffé intervals based on sample estimates of the variances of cell proportions; (iii) Quesenberry-Hurst intervals adapted for clustered data using Rao and Scott’s first and second order adjustments to X^2; (iv) simple Bonferroni intervals; (v) Bonferroni intervals based on transformations of the estimated proportions; (vi) Bonferroni intervals computed using the critical points of Student’s t. In several realistic situations, actual coverage rates of the multinomial procedures were found to be seriously depressed compared to the nominal rate. The best performing intervals, from the point of view of coverage rates and coverage symmetry (an extension of an idea due to Jennings), were the t-based Bonferroni intervals derived using log and logit transformations. Of the Scheffé-like procedures, the best performance was provided by Quesenberry-Hurst intervals in combination with first-order Rao-Scott adjustments.

    Release date: 1989-12-15
Data (0)

Data (0) (0 results)

No content available at this time.

Analysis (7)

Analysis (7) ((7 results))

  • Articles and reports: 12-001-X202200100009
    Description:

    In finite population estimation, the inverse probability or Horvitz-Thompson estimator is a basic tool. Even when auxiliary information is available to model the variable of interest, it is still used to estimate the model error. Here, the inverse probability estimator is generalized by introducing a positive definite matrix. The usual inverse probability estimator is a special case of the generalized estimator, where the positive definite matrix is the identity matrix. Since calibration estimation seeks weights that are close to the inverse probability weights, it too can be generalized by seeking weights that are close to those of the generalized inverse probability estimator. Calibration is known to be optimal, in the sense that it asymptotically attains the Godambe-Joshi lower bound. That lower bound has been derived under a model where no correlation is present. This too, can be generalized to allow for correlation. With the correct choice of the positive definite matrix that generalizes the calibration estimators, this generalized lower bound can be asymptotically attained. There is often no closed-form formula for the generalized estimators. However, simple explicit examples are given here to illustrate how the generalized estimators take advantage of the correlation. This simplicity is achieved here, by assuming a correlation of one between some population units. Those simple estimators can still be useful, even if the correlation is smaller than one. Simulation results are used to compare the generalized estimators to the ordinary estimators.

    Release date: 2022-06-21

  • Articles and reports: 11-522-X201700014759
    Description:

    Many of the challenges and opportunities of modern data science have to do with dynamic aspects: evolving populations, the growing volume of administrative and commercial data on individuals and establishments, continuous flows of data and the capacity to analyze and summarize them in real time, and the deterioration of data absent the resources to maintain them. With its emphasis on data quality and supportable results, the domain of Official Statistics is ideal for highlighting statistical and data science issues in a variety of contexts. The messages of the talk include the importance of population frames and their maintenance; the potential for use of multi-frame methods and linkages; how the use of large scale non-survey data as auxiliary information shapes the objects of inference; the complexity of models for large data sets; the importance of recursive methods and regularization; and the benefits of sophisticated data visualization tools in capturing change.

    Release date: 2016-03-24

  • Articles and reports: 82-003-X201300611796
    Geography: Canada
    Description:

    The study assesses the feasibility of using statistical modelling techniques to fill information gaps related to risk factors, specifically, smoking status, in linked long-form census data.

    Release date: 2013-06-19

  • Articles and reports: 11F0024M20050008805
    Description:

    This paper reports on the potential development of sub-annual indicators for selected service industries using Goods and Services Tax (GST) data. The services sector is now of central importance to advanced economies; however, our knowledge of this sector remains incomplete, partly due to a lack of data. The Voorburg Group on Service Statistics has been meeting for almost twenty years to develop and incorporate better measures for the services sector. Despite this effort, many sub-annual economic measures continue to rely on output data for the goods-producing sector and, with the exception of distributive trades, on employment data for service industries.

    The development of sub-annual indicators for service industries raises two questions regarding the national statistical program. First, is there a need for service output indicators to supplement existing sub-annual measures? And second, what service industries are the most promising for development? The paper begins by reviewing the importance of service industries and how they behave during economic downturns. Next, it examines considerations in determining which service industries to select as GST-based, sub-annual indicators. A case study of the accommodation services industry serves to illustrate improving timeliness and accuracy. We conclude by discussing the opportunities for, and limitations of, these indicators.

    Release date: 2005-10-20

  • Articles and reports: 11-522-X20020016731
    Description:

    Behavioural researchers use a variety of techniques to predict respondent scores on constructs that are not directly observable. Examples of such constructs include job satisfaction, work stress, aptitude for graduate study, children's mathematical ability, etc. The techniques commonly used for modelling and predicting scores on such constructs include factor analysis, classical psychometric scaling and item response theory (IRT), and for each technique there are often several different strategies that can be used to generate individual scores. However, researchers are seldom satisfied with simply measuring these constructs. They typically use the derived scores in multiple regression, analysis of variance and numerous multivariate procedures. Though using predicted scores in this way can result in biased estimates of model parameters, not all researchers are aware of this difficulty. The paper will review the literature on this issue, with particular emphasis on IRT methods. Problems will be illustrated, some remedies suggested, and areas for further research will be identified.

    Release date: 2004-09-13

  • Articles and reports: 62F0014M1998013
    Geography: Canada
    Description:

    The reference population for the Consumer Price Index (CPI) has been represented, since the 1992 updating of the basket of goods and services, by families and unattached individuals living in private urban or rural households. The official CPI is a measure of the average percentage change over time in the cost of a fixed basket of goods and services purchased by Canadian consumers.

    Because of the broadly defined target population of the CPI, the measure has been criticised for failing to reflect the inflationary experiences of certain socio-economic groups. This study examines this question for three sub-groups of the reference population of the CPI. It is an extension of earlier studies on the subject done at Statistics Canada.

    In this document, analytical consumer price indexes sub-group indexes are compared to the analytical index for the whole population calculated at the national geographic level.

    The findings tend to point to those of earlier Statistics Canada studies on sub-groups in the CPI reference population. Those studies have consistently concluded that a consumer price index established for a given sub-group does not differ substantially from the index for the whole reference population.

    Release date: 1999-05-13

  • Articles and reports: 12-001-X198900214568
    Description:

    The paper describes a Monte Carlo study of simultaneous confidence interval procedures for k > 2 proportions, under a model of two-stage cluster sampling. The procedures investigated include: (i) standard multinomial intervals; (ii) Scheffé intervals based on sample estimates of the variances of cell proportions; (iii) Quesenberry-Hurst intervals adapted for clustered data using Rao and Scott’s first and second order adjustments to X^2; (iv) simple Bonferroni intervals; (v) Bonferroni intervals based on transformations of the estimated proportions; (vi) Bonferroni intervals computed using the critical points of Student’s t. In several realistic situations, actual coverage rates of the multinomial procedures were found to be seriously depressed compared to the nominal rate. The best performing intervals, from the point of view of coverage rates and coverage symmetry (an extension of an idea due to Jennings), were the t-based Bonferroni intervals derived using log and logit transformations. Of the Scheffé-like procedures, the best performance was provided by Quesenberry-Hurst intervals in combination with first-order Rao-Scott adjustments.

    Release date: 1989-12-15
Reference (1)

Reference (1) ((1 result))

  • Geographic files and documentation: 92F0138M1993001
    Geography: Canada
    Description:

    The Geography Divisions of Statistics Canada and the U.S. Bureau of the Census have commenced a cooperative research program in order to foster an improved and expanded perspective on geographic areas and their relevance. One of the major objectives is to determine a common geographic area to form a geostatistical basis for cross-border research, analysis and mapping.

    This report, which represents the first stage of the research, provides a list of comparable pairs of Canadian and U.S. standard geographic areas based on current definitions. Statistics Canada and the U.S. Bureau of the Census have two basic types of standard geographic entities: legislative/administrative areas (called "legal" entities in the U.S.) and statistical areas.

    The preliminary pairing of geographic areas are based on face-value definitions only. The definitions are based on the June 4, 1991 Census of Population and Housing for Canada and the April 1, 1990 Census of Population and Housing for the U.S.A. The important aspect is the overall conceptual comparability, not the precise numerical thresholds used for delineating the areas.

    Data users should use this report as a general guide to compare the census geographic areas of Canada and the United States, and should be aware that differences in settlement patterns and population levels preclude a precise one-to-one relationship between conceptually similar areas. The geographic areas compared in this report provide a framework for further empirical research and analysis.

    Release date: 1999-03-05
Date modified: