2020 Biennial Waste Management Survey

Why are we conducting this survey?

This survey will provide information that will help Canadians understand how much waste is managed by governments and businesses in Canada. Data will be collected from businesses within the waste management industry, as well as from businesses that are engaged in handling some or all of their own waste, through partnerships and material recovery agreements. The results will assist businesses and policy makers in making sound decisions related to waste management, based on data that apply specifically to activities conducted in this area. The survey will provide a comprehensive picture of waste management in Canada.

Your information may also be used by Statistics Canada for other statistical and research purposes.

Your participation in this survey is required under the authority of the Statistics Act.

Other important information

Authorization to collect this information

Data are collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S-19.

Confidentiality

By law, Statistics Canada is prohibited from releasing any information it collects that could identify any person, business, or organization, unless consent has been given by the respondent, or as permitted by the Statistics Act. Statistics Canada will use the information from this survey for statistical purposes only.

Record linkages

To enhance the data from this survey and to reduce the reporting burden, Statistics Canada may combine the acquired data with information from other surveys or from administrative sources.

Data-sharing agreements

To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes. Statistics Canada will only share data from this survey with those organizations that have demonstrated a requirement to use the data.

Section 11 of the Statistics Act provides for the sharing of information with provincial and territorial statistical agencies that meet certain conditions. These agencies must have the legislative authority to collect the same information, on a mandatory basis, and the legislation must provide substantially the same provisions for confidentiality and penalties for disclosure of confidential information as the Statistics Act. Because these agencies have the legal authority to compel businesses to provide the same information, consent is not requested and businesses may not object to the sharing of the data.

For this survey, there are Section 11 agreements with the provincial and territorial statistical agencies of Newfoundland and Labrador, Nova Scotia, New Brunswick, Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia and the Yukon. The shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Section 12 of the Statistics Act provides for the sharing of information with federal, provincial or territorial government organizations. Under Section 12, you may refuse to share your information with any of these organizations by writing a letter of objection to the Chief Statistician, specifying the organizations with which you do not want Statistics Canada to share your data and mailing it to the following address:

Chief Statistician of Canada
Statistics Canada
Attention of Director, Enterprise Statistics Division
150 Tunney's Pasture Driveway
Ottawa, Ontario
K1A 0T6

You may also contact us by email at statcan.esdhelpdesk-dsebureaudedepannage.statcan@statcan.gc.ca or by fax at 613-951-6583.

For this survey, there are Section 12 agreements with Environment and Climate Change Canada, Government of Alberta Environment and Parks, the Recycling Council of Alberta, and the statistical agencies of Prince Edward Island, the Northwest Territories and Nunavut. For agreements with provincial and territorial government organizations, the shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Reporting period information

1. Information should be reported for this Jurisdiction/Company 's most recent fiscal year that ended at any time between April 1, 20xx and March 31, 20xx .

Fiscal Year Start date:

Fiscal Year End date:

2. What is the reason the reporting period does not cover a full year?

Select all that apply.

Seasonal operations
New business
Change of ownership
Temporarily inactive
Change of fiscal year
Ceased operations
Other
Specify other reason the reporting period does not cover a full year

Waste management services - Business

This survey applies to operating province.

3. Indicate which of the following waste management activities or services this company provides in operating province.

Non-hazardous waste (garbage):
Included in this category are materials, products or by-products for which the waste generator has no further use and which are received for disposal at waste disposal facilities or for processing at a waste processing facility.

Residential waste:
Residential waste refers to waste from primary and seasonal dwellings, which includes all single family, multi-family, high-rise and low-rise residences.

It includes:

the waste picked up by the municipality, (either using its own staff, or through contracted companies)
the waste from residential sources which is self-hauled to depots, transfer stations and landfills.

Construction, renovation and demolition waste (CR&D):
CR&D waste, also referred to as DLC (demolition, land clearing and construction waste), refers to waste generated by construction, renovation and demolition activities. It generally includes materials such as brick, painted wood, drywall, metal, cardboard, doors, windows, wiring. It excludes materials from land clearing on areas not previously developed. CR&D waste can come from residential sources such as house renovations or from non-residential sources for example the construction or demolition of office buildings.

Hazardous waste:
Includes materials or substances that given their corrosive, inflammable, infectious, reactive and toxic characteristics, may present a real or potential harm to human health or the environment. Due to their hazardous nature they require special handling, storing, transportation, treatment and disposal as specified by the Transportation of Dangerous Goods Regulations (1985), The Canadian Environmental Protection Act (1988), The Basel Convention (1989), or the Export and Import of Hazardous Waste Regulations (1992).

Industrial, commercial and institutional (IC&I) waste, non-residential:
IC&I waste is the waste generated by all non-residential sources in a municipality, and is excluded from the residential waste stream. This includes:

industrial waste, which is generated by manufacturing, and primary and secondary industries, and is managed off-site from the manufacturing operation. It is generally picked up under contract by the private sector
commercial waste is generated by commercial operations such as shopping centres, offices, etc. Some commercial waste (e.g., from small street-front stores) may be picked up by the municipal collection system along with the residential waste
institutional waste is generated by institutional facilities such as schools, hospitals, government facilities, senior homes, universities, etc. This waste is generally picked up under contract with the private sector.

Organic material collection, non-residential:
Collection of organic material (e.g., food scraps, leaves, grass, wood waste and paper products) from sources such as heavy and light industry, manufacturing, agriculture, warehousing, transportation, retail and wholesale commercial activities, restaurants, offices, educational or recreational facilities, health and other service facilities.

Organic material collection, residential:
Collection of organic material (e.g., food scraps, leaves, grass, yard trimmings) from dwellings, including apartment buildings and condominiums. Examples of collection methods are curbside collection, back door pick-up, and automated collection.

Organic processing services:
The breakdown of organic materials through either composting or anaerobic digestion processes.

Recyclable material collection services, non-residential (non-hazardous):
Collection of non-hazardous recyclable material, (e.g., cardboard, paper, plastics, metals, glass), from sources such as heavy and light industry, manufacturing, warehousing, transportation, retail and wholesale commercial activities, restaurants, offices, educational or recreational facilities, health and other service facilities. Recyclable material may be taken to an intermediate site such as a material recycling facility or transfer facility.

Recyclable material collection, residential (non-hazardous):
Collection of non-hazardous recyclable material (e.g., cardboard, paper, plastics, metals, glass) from dwellings, including apartment buildings and condominiums. Examples of collection methods are curbside collection, back door pick-up, and automated collection. Recyclable material may be taken to an intermediate site such as a material recovery facility or transfer facility. Recyclable material may be collected on a regular or flexible schedule.

Recycling services (non-hazardous waste):
Recovery and reprocessing of recyclable material (e.g., cardboard, paper, plastics, metals, glass) from the non-hazardous waste stream by baling, cleaning, sorting, reducing volume and preparing for shipment. Generally these activities take place in a material recycling facility (MRF).

Transfer station (non-hazardous):
A facility at which wastes transported by vehicles involved in collection are transferred to other vehicles that will transport the wastes to a disposal (landfill or incinerator) or recycling facility.

Waste collection services, non-residential (non-hazardous):
Collection of non-hazardous waste, garbage, rubbish, refuse, trash and commingled material from sources such as heavy and light industry, manufacturing, agriculture, warehousing, transportation, retail and wholesale commercial activities, restaurants, offices, educational or recreational facilities, health and other service facilities. Waste may be taken to an intermediate site or to a final disposal site.

Waste collection services, residential (non-hazardous):
Collection of non-hazardous waste, garbage, rubbish, refuse, trash and commingled material from dwellings, including apartment buildings and condominiums. Examples of collection methods are curbside collection, back door pick-up, and automated collection. Waste may be taken to an intermediate site or to a final disposal site.

Waste hauling or transportation:
The transportation of waste from one site or geographic area to another. This excludes the collection of waste and is limited to activities such as waste exporting or the shipping of wastes from transfer station to disposal or processing facility.

Select all that apply.

Non-hazardous solid waste (garbage), recyclables and organics
- Waste collection, residential
- Waste collection, non-residential
Industrial, commercial and institutional (IC&I)
Construction, renovation and demolition (CR&D)
Waste hauling or transportation
Recyclable material collection or organic material collection, residential
Recyclable material collection or organic material collection, non-residential
Recycling or organic processing services
e.g., material recycling facility, composting facility
Waste transfer station
Waste disposal or processing facility
Other non-hazardous waste services
- Specify other non-hazardous waste services
Hazardous waste
e.g., waste collection, waste transfer facility, waste treatment, waste recycling, waste disposal facility
Other waste management activities or services
e.g., waste collection, waste transfer facility, waste treatment, waste recycling, waste disposal facility
- Specify other waste management activities or services

Waste management services - Government

4. In 20xx, did this jurisdiction provide waste management services for itself?

Which services do you provide?

Select all that apply.

Collection
Disposal or processing
Recycling or organic material processing
Waste management planning or administration

5. In 20xx, did this jurisdiction provide waste management services to any other municipalities, cities, villages, towns or townships?

How many municipalities, cities, villages, towns or townships? (Maximum of 15)

6. Specify the names of the municipalities, cities, villages, towns and townships.

Municipality

7. Which waste management services were provided by your jurisdiction?

Select all that apply.

Organic processing services:
The breakdown of organic materials through either composting or anaerobic digestion processes.
Recycling services (non-hazardous waste):
Recovery and reprocessing of recyclable material (e.g., cardboard, paper, plastics, metals, glass) from the non-hazardous waste stream by baling, cleaning, sorting, reducing volume and preparing for shipment. Generally these activities take place in a material recycling facility (MRF).
Waste collection services, non-residential (non-hazardous):
Collection of non-hazardous waste, garbage, rubbish, refuse, trash and commingled material from sources such as heavy and light industry, manufacturing, agriculture, warehousing, transportation, retail and wholesale commercial activities, restaurants, offices, educational or recreational facilities, health and other service facilities. Waste may be taken to an intermediate site or to a final disposal site.
Waste collection services, residential (non-hazardous):
Collection of non-hazardous waste, garbage, rubbish, refuse, trash and commingled material from dwellings, including apartment buildings and condominiums. Examples of collection methods are curbside collection, back door pick-up, and automated collection. Waste may be taken to an intermediate site or to a final disposal site.
Collection
Disposal or processing
Recycling or organic material processing
Waste management planning or administration

Collection or transportation of non-hazardous waste (garbage)

8. In 20xx, was waste in this jurisdiction collected or transported by this jurisdiction's employees to a landfill, incinerator or energy from waste facility, residual waste processor or a transfer station?

Energy from waste (EFW):
EFW refers to any waste treatment that creates energy in the form of electricity or heat from a waste source. Most EFW processes produce electricity directly through combustion, or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic fuels.

Incineration/thermal treatment:
Incineration, in the context of waste, refers to the burning of waste. Incineration of waste materials converts the waste into incinerator bottom ash, flue gases, particulates, and heat, which can in turn be used to generate electric power. Most jurisdictions in Canada consider incineration to be disposal.

Landfill:
A site, on land, that is used primarily for the disposal of waste materials. The contents of landfills can include garbage which is not processed, and also residual material from processing operations (e.g., MRF residues, incinerator ash, organic processing residues).

Residual waste processing (non-hazardous):
An operation in which the physical or chemical properties of non-recyclable or compostable wastes are changed to reduce size and/or volume. Examples of waste processing are shredding, compaction & transformation.

9. In 20xx , was waste in this jurisdiction collected or transported by contractors hired by this jurisdiction to a landfill, incinerator or energy from waste facility, residual waste processor or a transfer station?

How many contractors? (Maximum of 15)

10. Specify the names of contractors hired by this jurisdiction.

Contractor

11. In 20xx , was waste in this jurisdiction collected or transported by another jurisdiction to a landfill, incinerator or energy from waste facility, residual waste processor or a transfer station?

How many other jurisdictions? (Maximum of 15)

12. Specify the names of the jurisdictions.

Jurisdiction

13. How many facilities were used to dispose the collected waste?

Do not specify transfer stations unless it is the final destination (e.g., incinerators/energy from waste facilities, landfills, residual waste processors).

Number of facilities (Maximum of 15)

14. Specify the names of the facilities where the waste was taken for disposal.

Do not specify transfer stations unless it is the final destination.

Facility

Collection or transportation of non-hazardous recyclable materials

15. In 20xx, did this jurisdiction have a curbside collection program for recyclable materials?

16. Were recyclable materials collected or transported by this jurisdiction's employees?

17. Were recyclable materials collected or transported by contractors hired by this jurisdiction?

How many contractors? (Maximum of 15)

18. Specify the names of contractors hired by this jurisdiction.

Contractor

19. Were recyclable materials collected or transported by another jurisdiction?

How many other jurisdictions? (Maximum of 15)

20. Specify the names of the jurisdictions.

Jurisdiction

21. How many facilities were used to process recyclable materials?

Number of facilities (Maximum of 15)

22. Specify the names of the facilities where the recyclable materials were taken for processing.

Facility

Collection or transportation of organic materials

23. In 20xx, did this jurisdiction have a curbside collection program for organic materials destined for processing?

Organic materials:
Materials that are or were once living, such as leaves, grass, yard trimmings, agricultural crop residues, wood waste, and paper and paperboard products or food scraps.

24. Were organic materials collected or transported by this jurisdiction's employees?

25. Were organic materials collected or transported by contractors hired by this jurisdiction?

How many contractors? (Maximum of 15)

26. Specify the names of the contractors hired by this jurisdiction.

Contractor

27. Were organic materials collected or transported by another jurisdiction?

How many other jurisdictions? (Maximum of 15)

28. Specify names of the other jurisdictions.

Jurisdiction

29. How many facilities were used to process these organic materials?

Number of facilities (Maximum of 15)

30. Specify the names of the facilities where the organic materials were taken for processing.

e.g., composting, anaerobic digestion

Organic materials:
Materials that are or were once living, such as leaves, grass, yard trimmings, agricultural crop residues, wood waste, and paper and paperboard products or food scraps.

Organic processing services:
The breakdown of organic materials through either composting or anaerobic digestion processes.

Facility

Waste management services

31. In 20xx, did this company provide waste management services to a municipality, waste management commission, or other waste management body?

Waste management services include the following:
Residential and non-residential non-hazardous recyclable material collection and processing

Residential and non-residential non-hazardous organic material collection and processing

Residential and non-residential non-hazardous waste, garbage, rubbish, refuse and trash collection and processing

How many municipalities, waste management commissions, or other waste management bodies? (Maximum of 15)

32. Specify the names of the municipalities, waste management commissions or waste management bodies.

Municipality, waste management commission or waste management body

Collection or transportation of non-hazardous waste (garbage)

33. In 20xx , did this company provide or sub-contract services for the collection or transportation of non-hazardous waste to a landfill, incinerator, energy from waste facility, residual waste processor or a transfer station?

To how many facilities was the waste taken? (Maximum of 15)

34. Specify the names of the facilities where the non-hazardous waste was taken for processing.

Include only final destinations such as landfills, incinerators, energy from waste facilities, residual waste processors.

Exclude transfer stations unless it is the final destination for waste collected/transported by this company.

Facility

Collection or transportation of non-hazardous recyclable materials

35. In 20xx, did this company collect or transport non-hazardous recyclable materials?

To how many facilities was this material brought? (Maximum of 15)

36. Specify the names of the facilities where the recyclable materials were taken.

Facility

Collection or transportation of organic materials

37. In 20xx, did this company collect or transport organic materials?

Organic materials:
Materials that are or were once living, such as leaves, grass, yard trimmings, agricultural crop residues, wood waste, and paper and paperboard products or food scraps.

To how many facilities was the material taken? (Maximum of 15)

38. Specify the names of the facilities where the organic material was taken for processing.

Facility

Organic material processing

39. In 20xx, did this Jurisdiction/Company own or operate a facility where organic materials were processed?

Organic materials:
Materials that are or were once living, such as leaves, grass, yard trimmings, agricultural crop residues, wood waste, and paper and paperboard products or food scraps.

Include landfills or sites where organic materials were composted.

How many facilities? (Maximum of 15)

40. Please provide the name and owner of each processing facility.

Facility

Facility name

Facility owner

Organic material processing

41. For the specified facility, indicate which organic materials are processed at the facility.

Estimating sources of waste (garbage), recyclables and organic materials:
It is acknowledged that it is often very difficult to track the quantities of waste and recyclable materials by source unless the business or local government collects or prepares materials from only one source (e.g., a firm that collects waste only from IC&I sources).

In this survey, you are being asked to estimate the proportion of materials by source of material at three points (if applicable and known): at the facility where organic material is processed, at the facility where recyclables are prepared and at disposal. If you engage in one or more of these activities, you will be asked to estimate the proportion of waste, recyclable or organic materials from residential, non-residential and construction and demolition sources. While it is recognized that such estimates may be difficult to make, you are asked to be as accurate as possible.

Sources of materials:
Refers to the sources of generation of the waste or recyclable material. These sources are classified as residential, industrial, commercial and institutional (IC&I) and construction, renovation and demolition (CR&D). It is sometimes difficult to ascertain the source of a given material because of lack of tracking or complex collection arrangements (e.g., when collection is contracted out or when collection vehicles pick up materials from a mix of sources on their routes).

Food waste:
Includes food wastes and food scraps from households and non-residential sources such as grocery stores, restaurants, etc., destined for composting or anaerobic digestion.

Source separated organic materials (SSO):
Source separation of organics is the setting aside of organic waste materials at their point of generation (the home, office, or other place of business) by the generator. Examples of SSO materials are food scraps, soiled paper packaging such as ice cream boxes, muffin paper, flour and sugar bags, paper coffee cups and paper plates.

Leaf and yard waste:
Includes any waste collected from a yard or garden such as leaves, grass clippings, plants, tree trimmings and branches.

Forestry waste:
The debris or leftover waste from the management of forests. This would include trees, stumps, branches, etc., that were discarded.

Wood waste:
The primary constituents of wood waste are used lumber, trim, trees, branches, and other wood debris from construction and demolition clearing and grubbing activities. It includes: dimensional lumber, plywood, particle board and fibre board, crating, wood fencing, pressure treated lumber, wood shingles, wooden doors, creosoted wood products, demolition wood waste, painted wood.

Agricultural waste:
All waste materials produced as a result of agricultural activities, including, for example, residues from the application of pesticides, herbicides, fertilizers and other chemicals, wastewater, bedding material, etc.

Biosolids:
Includes solid or semisolid material obtained from treated wastewater.

Include all quantities of food waste, materials from source separated organics programs (SSO), leaf and yard waste as well as Christmas trees and pumpkins.

Leaf and yard waste

Please provide the amount and source of leaf and yard waste processed at this facility.

When precise figures are not available, please provide your best estimate.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Food waste and SSO material

Please provide the amount and source of food waste and SSO material processed at this facility.

When precise figures are not available, please provide your best estimate.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Forestry waste and wood waste

Please provide the amount and source of forestry waste and wood waste processed at this facility.

When precise figures are not available, please provide your best estimate.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Agricultural waste

Please provide the amount and source of agricultural waste processed at this facility.

When precise figures are not available, please provide your best estimate.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Biosolids

Please provide the amount and source of biosolids processed at this facility.

When precise figures are not available, please provide your best estimate.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Other type of organic material 1

Please provide the amount and source of other type of organic material 1 processed at this facility.

When precise figures are not available, please provide your best estimate.

Specify other type of organic material 1

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Other type of organic material 2

Please provide the amount and source of other type of organic material 2 processed at this facility.

When precise figures are not available, please provide your best estimate.

Specify other type of organic material 2

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Other type of organic material 3

Please provide the amount and source of other type of organic material 3 processed at this facility.

When precise figures are not available, please provide your best estimate.

Specify other type of organic material 3

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

If the exact source breakdown is not available, please provide your best estimate for each source.

Industrial, commercial and institutional (IC&I)

If the exact source breakdown is not available, please provide your best estimate for each source.

Construction, renovation and demolition (CR&D)

If the exact source breakdown is not available, please provide your best estimate for each source.

Recycling

42. In 20xx, did this Jurisdiction/Company own or operate a facility (municipally or privately operated) that prepared materials for recycling?

e.g., material recycling facility (MRF), recycling centre, drop-off depot

Recycling:
Recycling is defined as the process whereby a recyclable material (e.g., glass, metal, plastic, paper) is diverted from the waste stream in order to be remanufactured into a new product, or is used as a raw material substitute.

Recycling centre/drop off depot:
A facility or site where the public can bring materials for recycling or re-use. In some cases, household hazardous waste or special waste is accepted at these sites.

Material Recycling Facility (MRF):
A facility where materials that are collected for recycling are prepared or processed. The preparation or processing can include sorting, baling, cleaning, crushing, volume reduction and storing until shipment.

How many facilities? (Maximum of 15)

43. Please provide the name and owner of each recycling facility.

Facility

Facility name

Facility owner

44. For the specified facility, indicate your best estimate of the sources of recycled materials.

Ferrous metals:
These are metals which contain iron. They may have small amounts of other metals or other elements added, to yield specific properties. All ferrous metals are magnetic and give little resistance to corrosion. Steel is an example of a ferrous metal. The recycling of ferrous metals include but is not limited to the processing of tin/steel cans, strapping, as well as the extraction of metals from appliances.

Scrap metal:
Any metal cutting or reject of a manufacturing operation, which may be suitable for recycling.

Textiles:
Material composed of natural or synthetic fibers, including any combination of animal derived material such as wool or silk, plant-derived material such as linen and cotton, and synthetic material such as polyester or nylon (e.g., towels, shoes, purses, clothing, curtains and carpets).

White goods:
Includes metal items such as: stoves, fridges, freezers, air conditioners, dehumidifiers, washers, dryers, hot water tanks, metal sinks, microwaves, and various other metal items.

Plastics:
PET (1): Polyethylene Terephthalate, commonly abbreviated as PET or PETE, is a polymer resin of the polyester family. PET is identified by the number 1 recycling symbol. Commonly recyclable PET materials include 2 litre soda bottles, water bottles, cooking oil bottles, peanut butter jars.

HDPE (2): High Density Polyethylene is a polyethylene thermoplastic made from petroleum. HDPE is identified by the number 2 recycling symbol. Some commonly recycled HDPE materials include detergent bottles, milk jugs, and grocery bags.

All other plastics (3-7): Polyvinyl Chloride - PVC (3), Low Density Polyethylene - LDPE (4), Polypropylene - PP (5), Polystyrene - PS (6), Other (7). Common uses: (3) plastic pipes, outdoor furniture, shrink wrap, water bottles, (4) dry cleaning bags, produce bags, trash can liners, (5) aerosol caps, drinking straws, (6) packaging pellets, Styrofoam cups, (7) food containers.

Electronics:
Electronics are items that function through the use of electricity and/or batteries. Also included are items that have a circuit board but do not necessarily require electricity from an outlet (such as telecommunication equipment). Examples are personal computers, laptops, monitors, peripheral devices (printers, scanners, etc.), telephones, cell phones, facsimile machines, stereos, portable music players and children's toys containing electronic components.

Only count quantities once. Exclude organic materials reported in question 41.

Newsprint and magazines

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Corrugated cardboard

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Mixed paper fibre and boxboard

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Glass

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Ferrous metals

Include ferrous scrap metal.

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

White goods

e.g., household appliances

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Aluminum

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Copper

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Mixed metals

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Plastics

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Aseptic containers and tetra packs

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Gable top containers

e.g., milk cartons

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Electronics

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Tires

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Construction, renovation and demolition (CR&D) material

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Textiles

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Other 1

Specify type of material

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Other 2

Specify type of material

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Other 3

Specify type of material

Quantity of materials

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Transfer stations

45. In 20xx, did this Jurisdiction/Company own or operate a transfer station for non-hazardous waste?

How many transfer stations? (Maximum of 15)

46. Please provide the following information for the transfer stations reported in Question 45.

Transfer station

Station name

Owner of this facility

Type of facility

Transfer station

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Was a weigh scale present?

Quantity of waste managed through this transfer station

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Waste (garbage) disposal or processing

47. Did this Jurisdiction/Company own or operate a facility where waste was disposed or processed in 20xx?

Include:

all types of landfills, e.g., sanitary, stabilized, bioreactor
incineration or thermal treatment, e.g., energy from waste, gasification
residual waste processing, e.g., conversion of non-recyclable waste to alternative fuel source.

How many facilities? (Maximum of 15)

48. Please provide the following information for the facilities reported in Question 47.

Facility

Facility name

Owner of this facility

Type of facility

Landfill
Processor
Incinerator

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Was a weigh scale present?

Quantity of waste disposed or processed in this facility

Residential

Industrial, commercial and institutional (IC&I)

Construction, renovation and demolition (CR&D)

Landfills

49. For the landfills reported in question 48, were any of the following materials received?

Bottom ash:
The residue ash that remains after the incineration of a waste material.

Contaminated soil:
Soils containing materials that, by their nature, require controlled disposal.

Clean fill:
Uncontaminated inert solid material including soil, rock, stone, dredged material, used asphalt, and brick, block or concrete. The soil is considered "clean" because it has not been contaminated or affected, for example by a spill or release of toxic materials.

Bottom ash from sewage sludge or solid waste incineration

Report the quantity of bottom ash from sewage sludge or solid waste incineration.

Quantity received at landfill

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Contaminated soil

Report the quantity of contaminated soil.

Quantity received at landfill

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Clean fill

Report the quantity of clean fill.

Quantity received at landfill

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other
Specify other unit of measure

Household hazardous or special waste and waste reduction

50. In 20xx, did this jurisdiction, in cooperation or conjunction with another jurisdiction or solely, administer a program to collect household hazardous and special waste?

Household hazardous/special waste (HHW):
Materials generated by residential households that cannot be collected in standard residential recycling programs and present a risk to municipal waste management systems because of their hazardous and/or toxic nature. This includes solid or liquid materials, or containers holding gases which have outlived their usefulness. This waste may be flammable, corrosive, explosive or toxic and therefore should not be disposed in landfills or sewage systems.

Waste reduction

51. In 20xx, did this jurisdiction conduct any of the following programs to encourage the reduction of waste?

Select all that apply.

Bag limits
Distribution of backyard composters (subsidized)
Reduced garbage collection frequency
e.g., every two weeks
User fees or bag tags
Clear bag program for garbage
Other 1
- Specify program 1
Other 2
- Specify program 2
Other 3
- Specify program 3
Other 4
- Specify program 4
OR
None of the above

Exports of waste for disposal or processing

52. In 20xx, did this Jurisdiction/Company own or operate a facility in operating province that transported or exported non-hazardous waste for disposal or processing to another province or territory or to another country?

Include direct shipments and shipments from transfer stations.

How many facilities? (Maximum of 15)

53. Provide the names of facilities handling non-hazardous waste for the purpose of exporting to another province or territory or to another country.

Facility

Facility name

Facility operator

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other
Specify other unit of measure

Quantity of waste exported to another province or territory

Quantity of waste exported to the United States

Quantity of waste exported to countries other than the United States

Imports of waste for disposal or processing

54. In 20xx, was non-hazardous waste from outside this province or territory disposed or processed in this Jurisdiction/Company 's facility/facilities in operating province ?

e.g., landfill facility, incinerator and energy from waste facility, or residual waste processing facility

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

55. Report the quantity of non-hazardous waste disposed or processed in operating province from other provinces or territories or from the United States.

Quantity of non-hazardous waste received from other provinces or territories in

Quantity of non-hazardous waste received from the United States in

Exports of recyclable materials

56. In 20xx, did this Jurisdiction/Company own or operate a facility in operating province that transported or exported recyclable materials to a material recycling facility (MRF) in another province or territory or in another country?

Exclude exports of recyclable materials to end markets in other provinces or the United States.

How many facilities? (Maximum of 15)

57. Provide the names of facilities handling recyclable materials for the purpose of exporting to another province or territory or to another country.

Facility

Facility name

Facility operator

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other
Specify other unit of measure

Quantity of recyclables exported to another province or territory

Quantity of recyclables exported to the United States

Quantity of recyclables exported to countries other than the United States

Imports of recyclable materials

58. In 20xx, were recyclable materials from outside operating province processed in this Jurisdiction/Company's material recycling facility/facilities (MRF)?

Unit of measure

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other
Specify other unit of measure

59. Report the quantity of recyclable materials processed from other provinces or territories or from the United States.

Quantity of recyclables processed from other provinces or territories in

Quantity of recyclables processed from the United States in

Employment information

60. In 20xx, what was the average number of full-time (30 or more hours per week) and part-time (less than 30 hours per week) employees in operating province whose primary function is to work on the waste management activities of this Jurisdiction/Company ?

Exclude full-time equivalents for part-time employees, contract employees or sub-contractor's employees.

Average number of full-time employees in 20xx

Average number of part-time employees in 20xx

Waste management services - Business

61. Did this company provide waste management services in more than one province or territory in 20xx?

62. Indicate the other provinces or territories in which this company provides waste management services.

Select all that apply.

Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland and Labrador
Northwest Territories
Nova Scotia
Nunavut
Ontario
Prince Edward Island
Québec
Saskatchewan
Yukon

Attach files

63. If you wish to report or submit additional documents using a separate attachment, please follow the instructions below.

Steps to attach a document

Step 1. Press the Attach files button

Step 2. Choose the file to attach

Step 3. Double click on the file to attach

To attach more than one document, repeat steps 1 to 3.

The name and size of each file attached will be displayed on the page.

Note: Each file attached must not exceed 5 MB and for the entire questionnaire, the total size must not exceed 50 MB.

Waste management and materials recovery

64. Is this business involved in the purchase or resale of metal (ferrous and non-ferrous), glass, plastic or other material?

Ferrous metals are metals containing iron. They may contain other metals to yield specific properties, are magnetic and subject to corrosion. Steel is an example of a ferrous metal.

Non-ferrous metals include non-iron containing metals, such as copper and aluminum.

65. Which of the following materials were sold by this business in 20xx?

Include materials recovered from items such as automobiles, household appliances and furniture, construction materials, etc.

Non-ferrous metals:
Non-ferrous metals include non-iron containing metals, such as copper and aluminum.

Plastics:PET (1):
Polyethylene Terephthalate, commonly abbreviated as PET or PETE, is a polymer resin of the polyester family. PET is identified by the number 1 recycling symbol. Commonly recyclable PET materials include 2 litre soda bottles, water bottles, cooking oil bottles, peanut butter jars.

HDPE (2):
High Density Polyethylene is a polyethylene thermoplastic made from petroleum. HDPE is identified by the number 2 recycling symbol. Some commonly recycled HDPE materials include detergent bottles, milk jugs, and grocery bags.

All others plastics (3-7):
Polyvinyl Chloride – PVC (3), Low Density Polyethylene – LDPE (4), Polypropylene – PP (5), Polystyrene – PS (6), Other (7). Common uses: (3) plastic pipes, outdoor furniture, shrink wrap, water bottles, (4) dry cleaning bags, produce bags, trash can liners, (5) aerosol caps, drinking straws, (6) packaging pellets, Styrofoam cups, (7) food containers.

Include materials recovered from items such as automobiles, household appliances and furniture, construction materials, etc.

Select all that apply.

Ferrous Metal

Please indicate the amount of ferrous metal prepared for market and sold by this facility in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Non-ferrous metals

Please indicate the amount of non-ferrous metal prepared for market and sold by this facility in #{ReferencePeriod}.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Glass (include automotive)

Please indicate the amount of glass prepared for market and sold by this facility in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Plastic

Please indicate the amount of plastic prepared for market and sold by this facility in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Other material

Please indicate the amount of other material prepared for market and sold by this facility in 20xx.

Specify other material

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Waste management and materials recovery

66. What does your company do with its waste?

All of the waste is picked up by a waste management company

Some of the waste is picked up by a waste management company, but a portion is picked up by or sent to a third-party for recycling/recovery

May include: paper products sent to a pulp and paper processor; bottle return programs; metal brought to a scrap dealer, etc.

A third-party picks up the waste for recycling/recovery
i.e., a waste management company does not handle our waste

Important: These questions pertain to the portion of your company's waste that is not sent to or picked up by a waste management company.

Please include waste materials that are picked up by or sent directly to a third-party establishment for recovery/recycling.

Examples might include: paper products sent to a pulp and paper processor; bottle return programs; metal sent to a scrap dealer, etc.

67. Which of the following materials were picked up by or sent to a third-party in 20xx?

Plastics: PET (1):
Polyethylene Terephthalate, commonly abbreviated as PET or PETE, is a polymer resin of the polyester family. PET is identified by the number 1 recycling symbol. Commonly recyclable PET materials include 2 litre soda bottles, water bottles, cooking oil bottles, peanut butter jars.

HDPE (2):
High Density Polyethylene is a polyethylene thermoplastic made from petroleum. HDPE is identified by the number 2 recycling symbol. Some commonly recycled HDPE materials include detergent bottles, milk jugs, and grocery bags.

Food waste: Includes food wastes and food scraps from households and non-residential sources such as grocery stores, restaurants, etc., destined for composting or anaerobic digestion.

Non-ferrous metals:
Non-ferrous metals include non-iron containing metals, such as copper and aluminum.

Appliances (White goods): Includes metal items such as: stoves, fridges, freezers, air conditioners, dehumidifiers, washers, dryers, hot water tanks, metal sinks, microwaves, and various other metal items.

A third-party could include independent contractors, scrap metal company, etc.

Select all that apply.

Paper products

e.g., paper, mixed paper, cardboard, boxboard, etc.

Please provide the amount of paper products picked up by or sent to a third-party processor in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Plastic

e.g., products and packaging made of plastic that are sent for recovery/recycling

Please provide the amount of plastic picked up by or sent to a third-party processor in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Food waste

Please provide the amount of food waste picked up by or sent to a third-party processor in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Glass

Please provide the amount of glass picked up by or sent to a third-party processor in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Metal

Include ferrous and non-ferrous metals

Please provide the amount of metal picked up by or sent to a third-party processor in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Appliances

Please provide the amount of appliances picked up by or sent to a third-party processor in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Other material

Please provide the amount of other material picked up by or sent to a third-party processor in 20xx.

Specify other material

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Destination (e.g., company name)

Waste management and materials recovery

68. Does this establishment collect material as part of a take-it back program (e.g., used tank return, used/old electronic products)?

Include deposit-return programs and materials returned through Extended Producer Responsibility (EPR) programs.

Definition: Extended Producer Responsibility (EPR) is a program in which manufacturers of products are responsible for managing the end-of-life recycling/disposal of their products, post consumer use.

69. Which of the following materials did your company collect as part of a take-it back program in 20xx?

Appliances (White goods):
Includes metal items such as: stoves, fridges, freezers, air conditioners, dehumidifiers, washers, dryers, hot water tanks, metal sinks, microwaves, and various other metal items.

Select all that apply.

Electronic waste

Please indicate the amount of electronic waste your company collected in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Tires

Please indicate the amount of tires your company collected in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Appliances

Include items such as washers, dryers, stoves, fridges, etc.

Please indicate the amount of appliances your company collected in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Glass

Please indicate the amount of glass your company collected in 20xx.

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure

Other material

Please indicate the amount of other material your company collected in 20xx.

Specify other material

Quantity of materials

Unit of measure (UOM)

Note: If the UOM is not listed, select "Other specify".

Metric tonnes
Kilograms
Pounds
Cubic meters
Cubic yards
Short ton
Truck load
Bale
Units or items
Other specify
Specify other unit of measure