Quarterly Survey of Telecommunications

4th Quarter 2011

Business Special Surveys and Technology Statistics Division

This report covers the period from: month 2011 to month 2011

Confidential when completed

Respondent company

  • Legal Name
  • Operating Name
  • Contact Person
  • Job Title
  • Street
  • City
  • Province
  • Postal Code
  • Telephone
  • Fax
  • E-mail
  • Website

Correct as required

  • Legal Name
  • Operating or Trade Name (if different from legal name)
  • Contact person responsible for this survey (please print clearly)
  • Job Title
  • Street
  • City
  • Province
  • Postal Code
  • Telephone
  • Fax
  • E-mail
  • Website

Information for Respondents

Survey Purpose

This survey collects financial and operating data for the statistical measurement and analysis of the telecommunications industry. These data will be aggregated to produce national estimates of activity by industry. Those estimates are used by government, the private sector, international telecommunications organizations, academics, analysts, and the general public to better understand this sector's role in the social and economic fabric of Canada.

Authority

This quarterly survey is conducted under the authority of the Statistics Act, Revised Statutes of Canada 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act.

Confidentiality

Statistics Canada is prohibited by law from releasing any information from this survey which would identify a person, business, or organization, without their permission or as permitted by the Statistics Act. The confidentiality provisions of the Statistics Act are not affected by either the Access to Information Act or any other legislation. Therefore, for example, the Canada Revenue Agency cannot access identifiable survey data from Statistics Canada.

Data Sharing Agreements

To reduce response burden and to ensure more uniform statistics, Statistics Canada has entered into a data sharing agreement under section 12 of the Statistics Act to share information from all respondents with the Canadian Radio-television and Telecommunications Commission (CRTC).

Subsection 12(2) of the Statistics Act provides that where a respondent gives notice in writing to the Chief Statistician that the respondent objects to the sharing of the information by Statistics Canada, the information not be shared with the department or corporation unless the department or corporation is authorized by law to require the respondent to provide the information.

The CRTC is authorized by law to require the respondent to provide the information under section 37 of the Telecommunications Act. Information provided to the CRTC will be treated in accordance with the requirements of section 39 of the Telecommunications Act.

Planned Record Linkage

To enhance the data from this survey, Statistics Canada may combine it with information from other surveys or from administrative sources.

Return Procedures

Please return the completed questionnaire(s) within 30 days of receipt. If you anticipate difficulty in making this deadline, please inform Statistics Canada of your expected filing date. Statistics Canada advises you that there could be a risk of disclosure during facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded all information collected under the authority of the Statistics Act.

Reporting Instructions

Please complete all questions that pertain to your operations.

To reduce the chances of call-backs to verify data, please record "N/A" for those items that are not relevant to your company.

Detailed instructions and definitions of terms used in the questionnaire are found in the Reporting Guide.

Assistance

If you require assistance, please contact:
Jo Anne Lambert
Telephone: (613) 951-6673
Facsimile: (613) 951-9920
E-mail: joanne.lambert@statcan.gc.ca

Thank you for your co-operation

Revenues (in thousands for the quarter)

1. Telecommunications operating revenues

  1. Local and access (include basic local service, optional local features, contribution, equipment, and other local and access)
  2. Long distance (include settlement)
  3. Data
  4. Private line
  5. Internet
  6. Mobile and paging
    • Retail
    • Wholesale
  7. Broadcast distribution (basic and non-basic programming)
  8. Other operating revenues
  • Total operating revenues

Network and subscribers (in thousands at quarter end)

2. Number of fixed network lines by market (Voice-grade equivalents) - Access dependent and independent

  1. Residential
  2. Business
  3. Wholesale
  4. Lines for internal use (OTS)
  • Total network lines

3. Number of mobile and paging subscriptions

  1. Retail (Residential and business)
  2. Wholesale
  • Total mobile and paging subscriptions

4. Number of Internet subscriptions

  1. Dial-up
  2. High speed - Cable modem
  3. High speed - Digital subscriber line (DSL)
  4. High speed - Other
  • Total number of Internet subscriptions

5. Number of multi-channel video services subscriptions

  1. By phone line
  2. By cable
  3. By satellite
  4. Other
  • Total multi-channel video services subscriptions

Volume (in thousands at quarter end)

6. Long distance minutes - Fixed

  1. Retail
    • October
    • November
    • December
    • Total
  2. Wholesale
    • October
    • November
    • December
    • Total
  • Total long distance minutes
    • October
    • November
    • December
    • Total

Note: Please include Domestic, US, and International long distance minutes.

7. Number of short message service (SMS)

  1. To mobile devices
  2. From mobile devices
  • Total number of short message service (SMS)

8. Mobile voice minutes

  1. Toll minutes (Long distance)
  2. Non-toll minutes (Basic voice)
  • Total mobile voice minutes

Capital expenditures (in thousands for the quarter)

9. Capital expenditures

Remarks

Certification

Please print the name of the person responsible for this return:

Signature:

I certify that the information provided in this report is complete and correct to the best of my knowledge.

  • Phone no.
  • Position
  • Date

Mineral Wool Including Fibrous Glass Insulation (For building insulation)

Manufacturing and Energy Division Monthly Survey

While participation in this survey is voluntary, your cooperation is important to ensure that the information collected in this survey is as accurate and as comprehensive as possible. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business.

Important

Kindly complete and return this form in time to be in Ottawa by the Tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain quantity information on mineral wool products including fibrous glass insulation (for domestic building insulation) that are produced and shipped by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends. Your information may also be used by Statistics Canada for other statistical and research purposes.

Data-Sharing agreements - To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No
Mineral Wool Including Fibrous Glass Insulation (For building insulation)
Report wool for building insulation
only (Domestic)
Do not include industrial type Code		 S.C.G.
Code		 Mineral Wool S.C.G.
Code		 Fibrous Glass
Quantity made during the month Quantity of goods of own manufacture shipped during the month Quantity made during the month Quantity of goods of own manufacture shipped during the month
Are you reporting in . . . square metres, square feet, square yards
Section A:            
R 40 (R.S.I. 7.0)            
R 35 (R.S.I. 6.1)            
R 31 (R.S.I. 5.4)            
R 28 (R.S.I. 4.9)            
R 20 (R.S.I. 3.5)            
R 12 (R.S.I. 2.1)            
R 10 (R.S.I. 1.7)            
R 8 (R.S.I. 1.4)            
Other (specify)            
Total all R Factors (6806.10.20)     (7019.39.21)    
 
Section B: Cubic metres
 
Loose wool (1) (6806.10.30)     (7019.90.21)    
 
Other (specify) (6806.10.90)     (7019.90.29)    
 

To Firms Reporting Loose Wool:

Report the total volume of Loose wool produced and shipped domestically each month in cubic-meters (cubic feet X 0.028317 = cubic meters).

Calculate the volume as follows: Volume = Product weight (grams or pounds) / Density of application at R28 (grams per cubic metre or pounds per cubic foot)

If your billing unit is the bag, calculate the volume per bag and multiply by number of bags.

(1) Include pouring wool, blowing wool, attic wool, bulk wool or granulated wool.

For further information please call 1-800-386-1275 or by Fax: 1-888-883-7999.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

 

5-3121-1402: 2009-01-12 STC/IND-310-60032

 

120

Manufacturing and Energy Division Monthly Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business.

Important

Kindly complete and return this form in time to be in Ottawa by the Tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain information on quantities of steel wire and specified wire products that are produced and shipped by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends. Your information may also be used by Statistics Canada for other statistical and research purposes.

Data-Sharing agreements - To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No

Instructions

Reporting Instructions – Please read the reporting instructions before completing this form.

Items A-1 TO D-2: Shipments Of Wire – To The Trade
Manufacturers should report shipments of wire produced from domestic or imported wire rod. Report quantities sold to the trade, to agents, to distributors or to other manufacturers. Do not include tonnage of wire transferred to other plant(s) of your own company, including subsidiary companies, for further processing. Wire purchased and resold in the same condition should also be excluded. In Section B, report uncoated plain wire of carbon steel and alloy steel including stainless.

Item E-1 To I-1: Production And Shipments Of Fabricated Wire Products
Report production/shipment of specified wire products to the trade, to agents, distributors, wholesalers, etc. Do not include quantities consumed or transferred within your own operations as well as shipments to your own plants. Also exclude shipments of products purchased and resold in the same condition.

Steel Wire and Specified Wire Products
Item Standard classification of goods Shipments (to)
Domestic market Export market
Are you reporting in . . . metric tonnes, imperial tons
1. Shipments Of Steel Wire
A. Barbed Wire
A-1 Barbed wire of iron or steel		 7313.00.1  
B. Uncoated Steel Wire
B-1 Wire of iron or non-alloy steel, not plated or coated		 72.17.10
B-2 Wire of stainless steel and other alloy, not coated or covered 7223.00.10
C. Galvanized Steel Wire
C-1 Wire of iron or non-alloy steel, plated or coated, with zinc		 7217.20
D. Other Coated Steel Wire
D-1 Wire of iron or non-alloy steel, plated or coated with other base metals		 7217.30
D-2 Wire of iron or non-alloy steel, plated or coated with material other than metal 7217.90

 

Steel Wire and Specified Wire Products
2. Production And Shipments Of Fabricated Wire Products – Standard classification of goods Production Shipments (to)
Domestic market Export market
E. Farm Fencing And Wire Chain Link Fabric –
E-1 Farm fencing, welded or woven, of iron or steel wire		 7314.19.50
7314.20.20
7314.31
7314.39		  
E-2 Chain link fencing of iron or steel wire, plated or coated with zinc 7314.41.13
F. Wire Mesh (Bright Or Uncoated And Galvanized) – Filets
F-1 Mesh, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more, for concrete reinforcement, of iron or steel wire		 7314.20.21
F-2 Other mesh of iron or steel wire, welded at the intersection, for concrete reinforcement, plated or coated with zinc 7314.31.21
F-3 Other mesh of iron or steel wire, welded at the intersection, for concrete reinforcement, excluding zinc plated or coated 7314.39.21
G. Wire Rope –
G-1 Iron or steel wire rope (all single strand material), not electrically insulated		 7312.10.00.1
G-2 Iron or steel wire rope (all multiple strand material), not electrically insulated 7312.10.00.2
H. Nails And Staples –
H-1 Wire roofing nails; wire nails of a length of 25 mm or more, of iron or steel, but excluding such articles with heads of copper
a) In strips (gun nails)		 7317.00.10.1
b) Others (in bulk) 7317.00.10.9
H-2 Staples, of iron or steel 7317.00.93
I. All Other Wire Products (Specify) –
I-1 ...		  

 

For further information please call 1-800-386-1275 or by Fax: 1-888-883-7999.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

 

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

 

5-3121-1303: 2009-01-15 STC/IND-310-60033

105

Manufacturing and Energy Division Monthly Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business.

Important

Kindly complete and return this questionnaire no later than the Tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

Survey purpose - The purpose of this survey is to obtain information on quantities of tobacco products that are produced and sold by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends. Your information may also be used by Statistics Canada for other statistical and research purposes.

Data-Sharing agreements - To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No
Steel Pipe and Tubing
PRODUCT CLASSIFICATION Production Shipments
For own use1 For Sale Total
Domestic Export
Are you reporting in . . . metric tonnes, imperial tons, pounds
1. Pipe, welded and seamless:          
(a) Linepipe:          
(i) Up to and including 4½” (11.43 cm) outside diameter          
(ii) Over 4½” (11.43 cm) up to and including 16” (40.64 cm) outside diameter          
(iii) Over 16” (40.64 cm)          
(b) Hollow structural sections:          
(i) Up to and including 16” (40.64 cm) periphery          
(ii) Over 16” (40.64 cm) periphery          
(c) Standard pipe:          
(i) Up to and including 4½” (11.43 cm) outside diameter          
(ii) Over 4½” (11.43 cm) up to and including 16” (40.64 cm) outside diameter          
(d) Other pipe          
(i) Up to and including 4½” (11.43 cm) outside diameter          
(ii) Over 4½” (11.43 cm) up to and including 16” (40.64 cm) outside diameter          
(ii) (iii) Over 16” (40.64 cm)          
2. Mechanical tubing welded:
(a) Produced from Hot rolled		          
(b) Produced from Cold rolled          
3. Oil Country tubular goods – welded & seamless:          
(a) Casing (incl. coupling)          
(b) Oilwell tubing (including coupling)          
4. Other tubular products – Total          
Pipe And Tubing – Total          
Producers interchange – For sale. Please specify product item number  
Note:
1 Under “For Own use” include usage of above products in other manufacturing operations.
2 Under the heading producers interchange for sale (cell 81), include shipments to other tubular manufactures. Do Not include these shipments in 1, 2, 3 or 4 above).

For further information please call 1-866-445-4323 or by Fax: 1-877-837-9217.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act. Statistics Canada thanks you for your participation in this survey.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

5-3121-1302: 2011-12-01 STC/IND-310-60036

104

Manufacturing and Energy Division Monthly Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business.

Important

Kindly complete and return this form in time to be in Ottawa by the Tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain information on quantities of net shipments of ingots and rolled steel products to end-use markets, by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends.

Data-Sharing agreements - To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No

Are you reporting in -

  • metric tonnes
  • imperial tons
  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address
Disposition of Shipments of Ingots and Rolled Steel Products, Non Alloy, Stainless and Alloy by Product
S.D.C.
No		 Section
Number		 1 2 3 4 5 6 7 8 9 10 11 12 13 14 All Products
  Steel Primary Forms Rails & heavy structural sections Intermediate structural sections Light structural sections Concrete reinforcing bars Other hot rolled bars Wire rods Railway track material Cold finished bars Plates Hot rolled sheets and coils Cold reduced sheets & strip, other cold rolled & coated Tin plate and T.F.S. Galvanized sheets including galvalume
11 A. Disposition of net shipments Steel service centres and other wholesalers and warehouses                              
21 Motor vehicles and parts                              
22 Railway operating                              
23 Railroad cars and locomotives                              
24 Shipbuilding                              
31 Steel fabrication                              
32 Metal building systems                              
33 Shipbuilding                              
34 Miscellaneous stamping and coating                              
41 Natural resources and extractive industries                              
51 Agricultural equipment                              
52 Non electrical machinery                              
53 Electrical machinery                              
54 Industrial packaging material                              
61 Pipes and tubes                              
62 Wire and wire products                              
63 Containers and closures                              
64 Appliances and utensils                              
70 Miscellaneous                              
  Domestic shipments (SDC 11 to 70) – Total                              
Alloy domestic shipments included in total domestic shipments
reported above –		                              
81 Domestic shipments – Total
Alloy domestic shipments – Total
Export (for final sale)
(i) USA		                              
82 (ii) Other countries                              
  Total disposition
SDC (11 to - à 70 + 81 + 82)
Alloy shipments – Total
B. Producers interchange – For sale
C. Exports for conversion and return –

D. Imports by producers (including conversion)		                              

Data-Sharing agreements – To reduce respondent burden, Statistics Canada has entered intodata-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.

Shipments:

Shipments refer to the quantity of manufactured goods that are shipped during the reference period, from the plant to the customers in domestic markets (SDC 11 to 70) or exports markets (SDC 81 and 82).

Stainless steel: Alloy steels containing, by weight, 1.2% or less of carbon and 10.5% or more of chromium, with or without other elements.

Other Alloy Steel: Steel not complying with the definition of stainless steel and containing in the proportion indicated:

– 0.30% or more of aluminum
– 0.0008% or more of boron
– 0.30% or more of chromium
– 0.30% or more of cobalt
– 0.40% or more of copper
– 0.40% or more of lead
– 1.65% or more of manganese
– 0.08% or more of molybdenum
– 0.30% or more of nickel
– 0.06% or more of niobium
– 0.60% or more of silicon
– 0.05% or more of titanium
– 0.30% or more of tungsten
– 0.10% or more of vanadium
– 0.05% or more of zirconium
– 0.10% or more of other elements
(except sulphur, phosphorus, carbon and nitrogen), taken separately

Stainless Nomenclature:

Structural Sections and Piling:

Heavy – Include all sizes of wide flanges and piling, beams, angles, channels, tees, zees, etc. having one leg or web over 152.4 mm.

Intermediate – Exclude all sizes of wide flange but include angles, channels, tees, zees, etc. having one leg or web from 76.2 mm up to and including 152.4 mm.

Light – Include angles, channels, etc., having a section smaller than 76.2 mm.

Other Hot Rolled Bars:

This category covers the following in straight or coiled form produced to bar tolerances.

Rounds 4.75 mm and over.

Squares, round-cornered squares, hexagons, octagons, ovals, half round or other special sections.

Flats with thickness 4.75 mm up to 12.7 mm, and width under 150.0 mm.

Universal Mill Plate – flats rolled on four sides with thickness 12.7 mm and over, width 150.0 mm up to and including 203.2 mm.

Grader Blades – curved and flat.

Grinding Balls and rods.

Wire Rod:

Coils produced to rod tolerance not exceeding 18.5 mm.

Flat Rolled – Hot Rolled Classification:
  Thickness - mm
Width - mm 12.7 and over 4.75 to 12.7 under 4.75
Under 150.0 Bar Bar Sheet
150.0 to 203.2 inclusive Universal mill plate Plate Sheet
Over 203.2 Plate Plate Sheet

For further information please call 1-800-386-1275 or by Fax: 1-888-883-7999.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

5-3121-1301: 2009-01-06 STC/IND-310-60035

102

Industrial chemicals and synthetic resins

Manufacturing and Energy Division Annual Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business (please see sharing agreement).

Important

Please return this questionnaire within 30 days. Please mail the completed questionnaire in the enclosed envelope or fax it to Statistics Canada at 1-204-983-3122.

Survey purpose

The purpose of this survey is to obtain information from Canadian manufactures on quantities of selected industrial chemicals and new virgin resins that is produced by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends. Your information may also be used by Statistics Canada for other statistical and research purposes.

Sharing Agreement

To avoid duplication of information collection and to ensure more uniform statistics, Statistics Canada has entered into a data sharing agreement with Environment Canada under section 12 of the Statistics Act for the sharing of information from this survey. The information shared will be used for statistical purposes only. Under Section 12, you may refuse to share your information with Environment Canada by writing to the Chief Statistician and returning your letter of objection along with the completed questionnaire.

Was this plant operational during the reporting period?

  • Yes
  • No
Industrial chemicals and synthetic resins
Industrial Chemicals Commodity code for Statistics Canada use Quantity produced (including intermediate
products made in this establishment and
used in making other products)
Are you reporting in . . . metric tonnes, kilograms, pounds  
1. Hydrochloric acid (muriatic), 100% – 2806.10.20  
2. Nitric acid, 100% – 2808.00.10  
3. Phosphoric acid; wet process (as 100% P2 O5 ) – 2809.20  
4. Sulphuric acid, all grades, including oleum (as 100%) – 2807.00  
5. Aluminum sulphate (alum) – 2833.22  
6. Ammonia anhydrous, 100% – 2814.10  
7. Ammonium nitrate, all grades – 3102.30  
8. Ammonium phosphate, all grades – 3105.30  
9. Butadiene – 2901.24.10  
10. Butylene – 2901.23  
11. Carbon black – 2803.00  
12. Chlorine – 2801.10  
13. Ethylene – 2901.21  
14. Formaldehyde 100% solids basis – 2912.11  
15. Hydrogen peroxide – 100% – 2847.00  
16. Methyl alcohol (Methanol) – 2905.11  
17. Propylene (as propylene in all grades) – 2901.22  
18. Sodium chlorate – 2829.11  
19. Sodium hydroxide (caustic soda) (as 100% NaOH) – 2815.10  
20. Urea (all grades) – 3102.10  
21. Benzene – 2902.20  
22. Toluene – 2902.30  
23. Xylene – 2902.40  
24. Zinc oxide – 2817.00.10  
Industrial chemicals and synthetic resins
Synthetic Resins Commodity code for Statistics Canada use Quantity produced of New Virgin Resin produced
(excluding compounding
or colouring ingredients
Are you reporting in . . . metric tonnes, kilograms, pounds  
25. Polyethylene, low density – 3901.10  
26. Polyethylene, linear low density – 3901.90.10  
27. Polyethylene, high density – 3901.20  
28. Polystyrene – 3903.10  
29. Acrylonitrile-butadiene-styrene (abs) – 3903.30  
30. Polyvinyl chloride – 3904.10  
31. Polyesters, unsaturated – 3907.91  
Respondent’s comments section
Statistics Canada commonly compares responses to this questionnaire with those provided by your organization last year. In order to reduce the possibility of further inquiries, would you please provide explanations of any significant changes in the reported data.

Has there been a change in ownership during the reporting period?

  • Yes
  • No

For further information please call 1-800-386-1275 or by Fax: 1-204-983-3122.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

5-3121-1400: 2009-01-12 STC/IND-310-60014

107

Production and Disposition of Tobacco Products

Manufacturing and Energy Division Monthly Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business.

Important

Kindly complete and return this questionnaire no later than the tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain information on quantities of tobacco products that are produced and sold by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends. Your information may also be used by Statistics Canada for other statistical and research purposes.

Statistics Canada thanks you for your participation in this survey.

Data-Sharing agreements - To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No

Definitions and reporting instructions (letters refer to column headings)

A. and G. Opening and Closing inventory Domestic inventory only. Any inventories held outside Canada should be recorded as export in the month when transfer into inventory took place. Opening inventory for the month under review should be equal to the closing inventory of the previous month.

B. Total production All Canadian production for domestic sales or for export to any destination within or outside North America.

C. Domestic sales Goods invoiced to wholesalers, retailers and institutions, less returned goods credited to same. Samples are also to be included.

D. Domestic duty-free sales Sales in Canada. Include sales to ship, air and border stores as well as foreign embassies in Canada.

E. Export sales – bulk shipments Cross border shipments. Include shipments to diplomats outside Canada as well as transfers into inventories held outside Canada in the month the transfer took place. Do not include sales from inventories held outside Canada.

F. Adjustments All non-sale transactions, such as goods damaged, destroyed, stolen and reworked as well as stock adjustments.

Please ensure, for each line, that values in column A plus B, minus the sum of values in columns C to E, plus F equals the value in column G.

Commodity S.C.G.
Code		 Opening inventory Total production Sales Adjustments Closing inventory
Domestic Domestic Duty-free Export bulk shipments
For Definitions See "Definitions and reporting instruction" section above A B C D E F G
Cigarettes 1 (thousands) 2402.20              
Cigars 2 (thousands) 2402.10              
Manufactured tobacco
Fine cut 3 (Kilograms)		 2403.10.20              
Pipe tobacco 4 (Kilograms) 2403.10.10              
Non-manufactured tobacco
Leaf 5 (Kilograms)		 2401              

Commodity descriptions

  1. Cigarettes containing tobacco, regular, king size, filter, plain.
  2. Cigars, cigarillos, cheroots and similar products.
  3. Fine cut smoking tobacco intended for cigarettes.
  4. Pipe smoking tobacco.
  5. Unmanufactured leaf tobacco packaged for retail sale.

Respondent’s comments section

Statistics Canada commonly compares responses to this questionnaire with those provided by your organization last month. In order to reduce the possibility of further inquiries, would you please provide explanations of any significant changes in the reported data.

For further information please call 1-866-445-4323 or by Fax: 1-877-837-9217.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

5-3121-1423: 2011-12-12 STC/IND-310-60012

248

Cement

Manufacturing and Energy Division Monthly Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business (please see sharing agreement).

Important

Kindly complete and return this form in time to be in Ottawa by the Tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain information on quantities of domestic cement that are produced and shipped by Canadian manufacturers and quantities of domestic and imported cement distributed by region and exported. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends.

Sharing Agreement

In order to avoid duplication of enquiry and to provide for a uniform system of statistics, agreements for the exchange of information collected in this survey, have been made under Section 12 of the Canada Statistics Act, with provincial mining departments in the provinces of Newfoundland, New Brunswick, Quebec, Ontario, Manitoba and British Columbia, in respect of establishments located within the boundaries of their respective Province; and with the federal Department of Natural Resources Canada with respect to all establishments. Section 12 agreements shall not apply if you object in writing and mail your letter, together with the completed questionnaire, to the Manufacturing, and Energy Division of Statistics Canada.

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No
Production, Shimpments And Stocks Of Domestic Cement
Type of cement S.C.G.
Code		 Opening Stocks Production Used at plant during month (incl. waste) Shipments of Cement of Own Manufacture Closing Stocks
Are you reporting in . . . metric tonnes, pounds, kilograms
1.1 Portland (all types) 2523.20  
1.2 Masonry 2523.90.10
1.3 Aluminous 2523.30
1.4 Oilwell 2523.90.20
1.5 Interground blended hydraulic cements 2523.90.50
1.6 Other cement, n.e.s. 2523.90.90
1.7 Total, all cements 2523
1.8 Clinker 2523.10
Note: Report only cement of own manufacture

 

Distribution Of Sales Of Cement (Domestic And Imported)
Type of cement S.C.G.
Code		 Region where sold Exports Total
Atlantic Quebec Ontario Prairies B.C., Yukon, N.W.T., Nunavut
Are you reporting in . . . metric tonnes, pounds, kilograms
Portland (except non-standard)
2.1 Standard Portland, bags		 2523.29.11              
2.2 Standard Portland, bulk 2523.29.12              
2.3 White Portland, bags 2523.21.10              
2.4 White Portland, bulk 2523.21.20              
Other Cements
3.1 Oilwell, bags		 2523.90.21              
3.2 Oilwell, bulk 2523.90.22              
3.3 Masonry 2523.90.10              
3.4 Interground blended hydraulic cements 2523.90.50              
3.5 Aluminous 2523.30              
3.6 Other cement, n.e.s. 2523.90.90              
3.7 Total, all cements 2523              
4. Clinker 2523.10              
5. Supplementary cementing materials 2621              
Note:
Include:
– sales to final customers
– sales of cement purchased from other domestic cement companies
– export shipments (incl. to foreign affiliates)
- sales of imported cement

Exclude:
– inter-plant warehouse shipments
– sales to other domestic cement companies

 

For further information please call 1-800-386-1275 or by Fax: 1-888-883-7999.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

5-3121-1408: 2009-01-12 STC/IND-310-60197

197

Manufacturing and Energy Division Monthly Survey

Collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S19. Completion of this questionnaire is a legal requirement under this Act. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business (please see sharing agreement).

Important

Kindly complete and return this form in time to be in Ottawa by the Tenth of the month following the month under review.

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain information on quantities of lumber produced and shipped, by Canadian manufacturers. Data collected by this survey provide an indicator of the economic condition of the producing industry, trends in the construction market and can serve as input to study market share and industry trends.

Sharing Agreement

To reduce response burden, Statistics Canada has entered into an agreement under Section 12 of the Canada Statistics Act with Alberta’s department of Forestry, Lands and Wildlife for the sharing of data. The Section 12 agreement shall not apply to your sawmill reports if an authorized officer or person of your company objects in writing to the Chief Statistician and mails the letter to the Manufacturing and Energy Division of Statistics Canada.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this mill operational during the reporting period?

  • Yes
  • No

Instructions

A. Production and Stocks of lumber:

Production - Report all lumber sawn in your mill, during the month. (Exclude re-sawing and lumber purchased or custom sawn for you by others.)

Stocks - Report all lumber held on the first and last day of the month, whether owned by your company or held for others.

Note: For species selection follow Standard Grading rules for Canadian lumber.

B. Receipts of lumber:

Purchases - Report all lumber purchased during the month.

Transfers In - Report all receipts, during the month, of lumber sawn for you by others from logs owned by you (custom sawn for you) and include lumber transferred to your plant from other sawmills of your own company.

C. Disposition of lumber:

(1) Shipments - Report all shipments, during the month, of lumber sold by you including shipments on consignment. Report also lumber owned by you and transferred to others for further processing on a custom basis (i.e. planing, kiln drying, etc.) and subsequent shipments.

(2) Transfers Out - Report transfers, during the month, of lumber custom sawn by you for others and include lumber transferred from your plant to other sawmills of your own company

(3) Waste and other losses

D. Production, Purchases, Shipments, Waste and Stocks of Wood Chips:

Complete this section if your mill produces chips as a by-product.

A. Production And Stocks Of Lumber
(See reporting instructions)		 M ft. b.m.
(nominal size)
1. Opening stocks  
. SCG
Code		 Production (sawing only) Stocks on hand
. M ft. b.m.
(nominal size)
2. Softwoods (coniferous species)      
(a) Douglas fir/Larch 4407.10.32    
(b) Red cedar 4407.10.71    
(c) Yellow cedar 4407.10.72    
(d) Hem-Fir 4407.10.33    
(e) Sitka spruce 4407.10.42    
(f) Spruce pine and fir (SPF) 4407.10.31    
(g) Red/white pine 4407.10.57    
(h) All other softwoods 4407.10.99    
Total softwoods xxxx    
3. Hardwoods (broad leaved species)
Total hardwoods		 4407.70.90    
Total Softwoods and Hardwoods xxxx    
. M ft. b.m.
(nominal size)
B. Receipts Of Lumber (Purchases and Transfers In)
(See reporting instructions)		      
C. Disposition Of Lumber
(See reporting instructions)		      
1. Shipments (To market)      
2. Transfers Out      
3. Waste and other losses      
D. Wood Chips - (4401.20)
(See reporting instructions) (Choose one measure) 1. O.D. ton imperial 2. bdu (2 400 lbs) 3. m 3 4. O.D. Metric Tonne - 5. 200 ft3 6. cords - 3 m3 7. Green metric tonne -		      
Stocks opening: Production: Purchases:
Shipments: Waste: Stocks closing:

Respondent’s comments section

Statistics Canada commonly compares responses to this questionnaire with those provided by your organization last month. In order to reduce the possibility of further inquiries, would you please provide explanations of any significant changes in the reported data.

For further information please call 1-800-386-1275 or by Fax: 1-888-883-7999.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

5-3121-1317: 2009-01-12 STC/IND-385-60039

185

Asphalt Roofing

Manufacturing and Energy Division Monthly Survey

While participation in this survey is voluntary, your cooperation is important to ensure that the information collected in this survey is as accurate and as comprehensive as possible. Under the provisions of the Statistics Act, Statistics Canada is prohibited by law from publishing or releasing, in any manner, any statistics which would divulge information obtained from this survey relating to any identifiable business without the previous written consent of that business.

Important

Kindly complete and return this form in time to be in Ottawa by the Tenth of the month following the month under review

Please update the name or address if necessary

Survey purpose

The purpose of this survey is to obtain information on selected asphalt roofing products that are produced, shipped and exported along with their destination of shipments by province. Data collected by this survey provide an indicator of the economic condition of the producing industry and can serve as input to study market share and industry trends. Your information may also be used by Statistics Canada for other statistical and research purposes.

Data-Sharing agreements - To reduce respondent burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations which must keep the data confidential and use them only for statistical purposes. The details of these agreements as well as information on record linkages were provided to you in the form of a letter with the January mail out. If you would like another copy of this information please contact us at 1-866-873-8789.

Instructions

Quantity made during month – Should represent the gross production from your machines less the amount of waste prior to shipments, unless the waste can be used for other purposes and has a commercial value. Report all production which qualifies under these terms regardless of where or to whom sold, except seconds. Seconds are to be considered as a scrap until sold and should be added to the production for the month in which they are shipped.

Quantity shipped during month – Report quantities of all your materials (both those manufactured by you and those purchased from other manufacturers or imported) shipped to customers in Canada or to other countries. Do Not Include Sales To Other Firms In Canada Producing Asphalt Roofing Products.

Regional breakdown of domestic shipments:

The Atlantic provinces include Newfoundland and Labrador, Prince Edward Island, Nova Scotia and New Brunswick; British Columbia includes the Yukon, Northwest Territories and Nunavut.

For further information please call 1-800-386-1275 or by Fax: 1-888-883-7999.

Statistics Canada advises you that there could be a risk of disclosure during the facsimile or other electronic transmission. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded to all information collected under the authority of the Statistics Act.

Has there been a change in ownership during the reporting period?

  • Yes
  • No

Was this plant operational during the reporting period?

  • Yes
  • No
Asphalt Roofing
Respondent's comments section
Statistics Canada commonly compares responses to this questionnaire with those provided by your organization last month. In order to reduce the possibility of further inquiries, would you please provide explanations of any significant changes in the reported data. (SGC-Code)		 1. Asphalt saturated shingles
(6807.90.10)		 2. Smooth surfaced organic felt roll roofings:
(6807.10.001)		 3. Mineral surfaced organic felt roll roofings and sidings:
(6807.10.002)		 4. Asphalt saturated organic felts:
(6807.10.004)		 5. Asphalt saturated and/or coated sheathings:
(6807.10.003)
Quantity Shipped During Month To: metric bundles1 metric rolls2 metric - tonnes2
Atlantic provinces          
Québec          
Ontario          
Manitoba          
Saskatchewan          
Alberta          
British Columbia – (Include Yukon, Northwest Territories and Nunavut)          
Total Canada          
Exports          
Total          
Quantity made during month          


Descriptions

  1. Asphalt saturated shingles: include all shingles produced on the shingle machine.
  2. Smooth surfaced organic felt roll roofings: include all smooth roofings as produced on the roofing machine and all similar products, such as Cap sheets, Base sheets, etc. Roll roofings surfaced with granules less than No. 11 gauge are to be classified as smooth roll roofings, viz., 60# coloured roofing.
  3. Mineral surfaced organic felt roll roofings and sidings: include all roll roofings surfaced with granules No. 11 and coarser and all roll type sidings produced completely on the roofing machine.
  4. Asphalt saturated organic felts: include organic and asbestos felt base saturated products which are not coated. DO NOT include glass fibre roofing felts impregnated with bitumen.
  5. Asphalt saturated and/or coated sheathings: include all paper base saturated sheathings and also saturated and coated sheathings from paper base.

1 Metric bundles – sufficient material to cover 3 sq. metres when applied.

2 Metric rolls – content of roll approximately 10 sq. metres.

  • Name of person responsible for this report
  • Telephone (Area code and number)
  • Facsimile
  • Website
  • E-mail address

5-3121-1315: 2009-01-05 STC/IND-310-60030 SQC/IND-310-60030

157

Subscribe to
Date modified: