Why are we conducting this survey?

This survey collects information on scientific activities of Canadian private non-profit organizations. The research and development expenditures and personnel information is used by federal, provincial and territorial governments and agencies, academics and international organizations for statistical analyses and policy purposes. These data also contribute to national totals of research and development activities. The payments and receipts information is used by these agencies to monitor knowledge flows across international borders and between Canadian organizations.

Your information may also be used by Statistics Canada for other statistical and research purposes.

Your participation in this survey is required under the authority of the Statistics Act.

Other important information

Authorization to collect this information

Data are collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S-19.

Confidentiality

By law, Statistics Canada is prohibited from releasing any information it collects that could identify any person, business, or organization, unless consent has been given by the respondent, or as permitted by the Statistics Act. Statistics Canada will use the information from this survey for statistical purposes only.

Record linkages

To enhance the data from this survey and to reduce the reporting burden, Statistics Canada may combine the acquired data with information from other surveys or from administrative sources.

Data-sharing agreements

To reduce the response burden, Statistics Canada has entered into data sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes. Statistics Canada will only share data from this survey with those organizations that have demonstrated a requirement to use the data.

Section 11 of the Statistics Act provides for the sharing of information with provincial and territorial statistical agencies that meet certain conditions. These agencies must have the legislative authority to collect the same information, on a mandatory basis, and the legislation must provide substantially the same provisions for confidentiality and penalties for disclosure of confidential information as the Statistics Act. Because these agencies have the legal authority to compel businesses to provide the same information, consent is not requested and businesses may not object to the sharing of the data.

For this survey, there are Section 11 agreements with the provincial and territorial statistical agencies of Newfoundland and Labrador, Nova Scotia, New Brunswick, Quebec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia and the Yukon. The shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Section 12 of the Statistics Act provides for the sharing of information with federal, provincial or territorial government organizations.

Under Section 12, you may refuse to share your information with any of these organizations by writing a letter of objection to the Chief Statistician, specifying the organizations with which you do not want Statistics Canada to share your data and mailing it to the following address:

Chief Statistician of Canada
Statistics Canada
Attention of Director, Enterprise Statistics Division
150 Tunney's Pasture Driveway
Ottawa, Ontario
K1A 0T6

You may also contact us by email at infostats@statcan.gc.ca or by fax at 1-514-496-4879

For this survey, there are Section 12 agreements with the statistical agencies of Prince Edward Island, the Northwest Territories and Nunavut. The shared data will be limited to information on in-house research and development expenditures (Question 18) and in-house research and development personnel (Question 26) pertaining to business establishments located within the jurisdiction of the respective province or territory.

Business or organization and contact information

1. Verify or provide the business or organization's legal and operating name and correct if needed.

Note: Legal name modifications should only be done to correct a spelling error or typo.

Legal Name

The legal name is one recognized by law, thus it is the name liable for pursuit or for debts incurred by the business or organization. In the case of a corporation, it is the legal name as fixed by its charter or the statute by which the corporation was created.

Modifications to the legal name should only be done to correct a spelling error or typo.

To indicate a legal name of another legal entity you should instead indicate it in question 3 by selecting 'Not currently operational' and then choosing the applicable reason and providing the legal name of this other entity along with any other requested information.

Operating Name

The operating name is a name the business or organization is commonly known as if different from its legal name. The operating name is synonymous with trade name.

• The operating name, which is different from the legal name, is a name the business or organization is commonly known as for day-to-day activities, and which is used to advertise and promote itself. The operating name is synonymous with trade name. Legal name:
• Operating name (if applicable):

2. Verify or provide the contact information of the designated business or organization contact person for this questionnaire and correct if needed.

Note: The designated contact person is the person who should receive this questionnaire. The designated contact person may not always be the one who actually completes the questionnaire.

• First name:
• Last name:
• Title:
• Preferred language of communication:
  • English
  • French
• Mailing address (number and street):
• City:
• Province, territory or state:
• Postal code or ZIP code:
• Country:
  • Canada
  • United States
• Email address:
• Telephone number (including area code):
• Extension number (if applicable):
• The maximum number of characters is 10.
• Fax number (including area code):

3. Verify or provide the current operational status of the business or organization identified by the legal and operating name above.

• Operational
• Not currently operational
  • Why is this business or organization not currently operational?
    • Seasonal operations
      • When did this business or organization close for the season? Date
      • When does this business or organization expect to resume operations? Date
    • Ceased operations
      • When did this business or organization cease operations? Date
      • Why did this business or organization cease operations?
        • Bankruptcy
        • Liquidation
        • Dissolution
        • Other
      • Specify the other reasons for ceased operations
    • Sold operations
      • When was this business or organization sold? Date
      • What is the legal name of the buyer?
    • Amalgamated with other businesses or organizations
      • When did this business or organization amalgamate? Date
      • What is the legal name of the resulting or continuing business or organization?
      • What are the legal names of the other amalgamated businesses or organizations?
    • Temporarily inactive but will re-open
      • When did this business or organization become temporarily inactive? Date
      • When does this business or organization expect to resume operations? Date
      • Why is this business or organization temporarily inactive?
    • No longer operating due to other reasons
      • When did this business or organization cease operations? Date
      • Why did this business or organization cease operations?

4. Verify or provide the current main activity of the business or organization identified by the legal and operating name above.

Note: The described activity was assigned using the North American Industry Classification System (NAICS).

This question verifies the business or organization's current main activity as classified by the North American Industry Classification System (NAICS). The North American Industry Classification System (NAICS) is an industry classification system developed by the statistical agencies of Canada, Mexico and the United States. Created against the background of the North American Free Trade Agreement, it is designed to provide common definitions of the industrial structure of the three countries and a common statistical framework to facilitate the analysis of the three economies. NAICS is based on supply-side or production-oriented principles, to ensure that industrial data, classified to NAICS, are suitable for the analysis of production-related issues such as industrial performance.

The target entity for which NAICS is designed are businesses and other organizations engaged in the production of goods and services. They include farms, incorporated and unincorporated businesses and government business enterprises. They also include government institutions and agencies engaged in the production of marketed and non-marketed services, as well as organizations such as professional associations and unions and charitable or non-profit organizations and the employees of households.

The associated NAICS should reflect those activities conducted by the business or organizational units targeted by this questionnaire only, as identified in the 'Answering this questionnaire' section and which can be identified by the specified legal and operating name. The main activity is the activity which most defines the targeted business or organization's main purpose or reason for existence. For a business or organization that is for-profit, it is normally the activity that generates the majority of the revenue for the entity.

The NAICS classification contains a limited number of activity classifications; the associated classification might be applicable for this business or organization even if it is not exactly how you would describe this business or organization's main activity.

Please note that any modifications to the main activity through your response to this question might not necessarily be reflected prior to the transmitting of subsequent questionnaires and as a result they may not contain this updated information.

The following is the detailed description including any applicable examples or exclusions for the classification currently associated with this business or organization.

Description and examples

• This is the current main activity
• This is not the current main activity
• Provide a brief but precise description of this business or organization's main activity:
  • e.g., breakfast cereal manufacturing, shoe store, software development

Main activity

5. You indicated that is not the current main activity.

Was this business or organization's main activity ever classified as: ?

• Yes
• When did the main activity change?
  • Date:
• No

6. Search and select the industry classification code that best corresponds to this business or organization's main activity.

Select this business or organization's activity sector (optional)

• Farming or logging operation
• Construction company or general contractor
• Manufacturer
• Wholesaler
• Retailer
• Provider of passenger or freight transportation
• Provider of investment, savings or insurance products
• Real estate agency, real estate brokerage or leasing company
• Provider of professional, scientific or technical services
• Provider of health care or social services
• Restaurant, bar, hotel, motel or other lodging establishment
• Other sector

Reporting period

1. What is the end date of this organization's fiscal year?

Note: For this survey, this organization's fiscal year end date should fall on or before March 31, 2026.

Here are some examples of fiscal periods that fall within the targeted dates:

• May 1, 2024 to April 30, 2025
• July 1, 2024 to June 30, 2025
• October 1, 2024 to September 30, 2025
• January 1, 2025 to December 31, 2025
• February 1, 2025 to January 31, 2026
• April 1, 2025 to March 31, 2026

This fiscal year will be referred to as 2025 throughout the questionnaire.

Fiscal Year-End date:

Organization status

2. What is this organization's business number (e.g., GST number or charitable registration number)?

Business number (9-digit number):

3. Is this organization affiliated with a hospital, a university or a government agency or department?

• Yes
• No

4. In 2025, what were this organization's total expenditures within Canada?

Please report all amounts in thousands of Canadian dollars.

If precise figures are not available, please provide your best estimate.

Total expenditures represent the total budget for all operations of this organization in the fiscal period. If 'total expenditures' cannot be calculated, total funds (from members, government programs and all other sources of funds) or total revenues can be provided.

CAN$ '000:

5. In 2025, what were this organization's total wages and salaries within Canada?

Please report all amounts in thousands of Canadian dollars.

If precise figures are not available, please provide your best estimate.

CAN$ '000:

6. In 2025, what was the average number of employees in full-time equivalents (FTE) within Canada for this organization?

If precise figures are not available, please provide your best estimate in full-time equivalents (FTE).

Number of employees

The organization's personnel is composed of full-time and part-time employees.

Full-time equivalent (FTE) = Number of persons who work full-time for the organization + part-time workers.

Example calculation: If out of four employees, one works full-time for the organization and the remaining three devote only one quarter of their working time to the organization, then: FTE = 1 + 1/4 + 1/4 + 1/4 = 1.75 employees.

In-house research and development ( R&D ) expenditures

Before you begin

For this survey

"In-house R&D" refers to:

Expenditures within Canada for R&D performed within this organization by:

• employees (permanent, temporary or casual)
• self-employed individuals or contractors who are working on-site on this organization's R&D projects.

"Payments for R&D performed by other organizations" refers to:

Payments made within or outside Canada to other organizations, individuals or companies to fund R&D performance:

• grants
• fellowships
• contracts.

In-house research and development ( R&D ) expenditures

7. In 2025, did this organization have expenditures for R&D performed in-house within Canada?

Exclude payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 13.

In-house refers to R&D which is performed on-site or within the organization's establishment. Exclude R&D expenses performed by other companies or organizations. A later question will collect these data.

Research and experimental development ( R&D ) comprise creative and systematic work undertaken in order to increase the stock of knowledge - including knowledge of humankind, culture and society - and to devise new applications of available knowledge.

R&D is performed in the natural sciences, engineering, social sciences and humanities. There are three types of R&D activities: basic research, applied research and experimental development.

Research work in the social sciences

Include if projects are employing new or significantly different modelling techniques or developing new formulae, analyzing data not previously available or applying new research techniques, development of community strategies for disease prevention or health education.

Exclude:

• routine analytical projects using standard techniques and existing data
• routine market research
• routine statistical analysis intended for on-going monitoring of an activity.
• Yes
• No

8. In 2025, what were this organization's expenditures for R&D performed in-house within Canada?

Exclude payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 13.

Please report all amounts in thousands of Canadian dollars.

Report '0' for no R&D expenditures.

In-house R&D expenditures are composed of current in-house R&D expenditures and capital in-house R&D expenditures.

Current in-house R&D expenditures

Include:

• wages, salaries, benefits and fringe benefits, materials and supplies
• services to support R&D, including on-site R&D consultants and contractors
• necessary background literature
• minor scientific equipment
• associated administrative overhead costs.

a. Wages, salaries of permanent, temporary and casual R&D employees

Include benefits and fringe benefits of employees engaged in R&D activities. Benefits and fringe benefits include bonus payments, holiday or vacation pay, pension fund contributions, other social security payments, payroll taxes, etc.

b. Services to support R&D

Include:

• payments to on-site R&D consultants and contractors working under the direct control of your organization
• other services including indirect services purchased to support in-house R&D such as security, storage, repair, maintenance and use of buildings and equipment
• computer services, software licensing fees and dissemination of R&D findings.

c. R&D materials

Include:

• water, fuel, gas and electricity
• materials for creation of prototypes
• reference materials (books, journals, etc.)
• subscriptions to libraries and data bases, memberships to scientific societies, etc.
• cost of outsourced (contracted out or granted) small R&D prototypes or R&D models
• materials for laboratories (chemicals, animal, etc.)
• all other R&D-related materials.

d. All other current R&D costs including overhead

Include administrative and overhead costs (e.g., office, post and telecommunications, internet, insurance), prorated if necessary to allow for non- R&D activities within the business.

Exclude:

• interest charges
• value-added taxes (goods and services tax (GST) or harmonized sales tax (HST)).

Capital in-house expenditures are the annual gross amount paid for the acquisition of fixed assets that are used repeatedly, or continuously in the performance of R&D for more than one year. Report capital in-house expenditures in full for the period when they occurred.

Include costs for software, land, buildings and structures, equipment, machinery and other capital costs.

Exclude capital depreciation.

e. Software

Include applications and systems software (original, customized and off-the-shelf software), supporting documentation and other software-related acquisitions.

f. Land acquired for R&D including testing grounds, sites for laboratories and pilot plants.

g. Buildings and structures that are constructed or purchased for R&D activities or that have undergone major improvements, modifications, renovations and repairs for R&D activities.

h. Equipment, machinery and all other capital

Include major equipment, machinery and instruments, including embedded software, acquired for R&D activities.

9. In 2026 and 2027, does this organization plan to make expenditures for R&D performed in-house within Canada?

Exclude payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 15.

Select all that apply.

Help text:

In-house R&D expenditures are composed of current in-house R&D expenditures and capital in-house R&D expenditures.

Research and experimental development (R&D) comprise creative and systematic work undertaken in order to increase the stock of knowledge - including knowledge of humankind, culture and society - and to devise new applications of available knowledge.

Inclusions

Prototypes

Include design, construction and operation of prototypes, provided that the primary objective is to make further improvements or to undertake technical testing.

Exclude if the prototype is for commercial purposes.

Pilot plants

Include construction and operation of pilot plants, provided that the primary objective is to make further improvements or to undertake technical testing.

Exclude if the pilot plant is intended to be operated for commercial purposes.

New computer software or significant improvements/modifications to existing computer software

Includes technological or scientific advances in theoretical computer sciences; operating systems e.g., improvement in interface management, developing new operating system of converting an existing operating system to a significantly different hardware environment; programming languages; and applications if a significant technological change occurs.

Contracts

Include all contracts which require R&D. For contracts which include other work, report only the R&D costs.

Research work in the social sciences

Include if projects are employing new or significantly different modelling techniques or developing new formulae, analyzing data not previously available or applying new research techniques.

Exclusions

Routine analysis in the social sciences including policy-related studies, management studies and efficiency studies

Exclude analytical projects of a routine nature, with established methodologies, principles and models of the related social sciences to bear on a particular problem (e.g., commentary on the probable economic effects of a change in the tax structure, using existing economic data; use of standard techniques in applied psychology to select and classify industrial and military personnel, students, etc., and to test children with reading or other disabilities).

Consumer surveys, advertising, market research

Exclude projects of a routine nature, with established methodologies intended for commercialization of the results of R&D.

Routine quality control and testing

Exclude projects of a routine nature, with established methodologies not intended to create new knowledge, even if carried out by personnel normally engaged in R&D.

Pre-production activities such as demonstration of commercial viability, tooling up, trial production, trouble shooting

Although R&D may be required as a result of these steps, these activities are excluded.

Prospecting, exploratory drilling, development of mines, oil or gas wells

Include only if for R&D projects concerned with new equipment or techniques in these activities, such as in-situ and tertiary recovery research.

Engineering

Exclude engineering unless it is in direct support of R&D.

Design and drawing

Exclude design and drawing unless it is in direct support of R&D.

Patent and licence work

Exclude all administrative and legal work connected with patents and licences.

Cosmetic modifications or style changes to existing products

Exclude if no significant technical improvement or modification to the existing products has occurred.

General purpose or routine data collection

Exclude projects of a routine nature, with established methodologies intended for on-going monitoring of an activity.

Routine computer programming, systems maintenance or software application

Exclude projects of a routine nature, with established methodologies intended to support on-going operations.

Routine mathematical or statistical analysis or operations analysis

Exclude projects of a routine nature, with established methodologies intended for on-going monitoring of an activity.

Activities associated with standards compliance

Exclude projects of a routine nature, with established methodologies intended to support standards compliance.

Specialized routine medical care such as routine pathology services

Exclude projects of a routine nature, with established methodologies intended for on-going monitoring of an activity.

Response text:

• In 2026
• In 2027
• No planned in-house R&D expenditures

10. In 2026, what are this organization's planned expenditures for R&D performed in-house within Canada?

Exclude payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 15.

Please report all amounts in thousands of Canadian dollars.

If precise figures are not available, please provide your best estimate.

Report '0' for no R&D expenditures.

11. In 2027, what are this organization's planned expenditures for R&D performed in-house within Canada?

Exclude payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 15.

Please report all amounts in thousands of Canadian dollars.

If precise figures are not available, please provide your best estimate.

Report '0' for no R&D expenditures.

Payments for R&D performed by other organizations

12. In 2025, did this organization make payments to other organizations to perform R&D within Canada or outside Canada?

Include:

• funding or grants provided to other organizations to perform R&D
• contracted out expenditures for R&D.

Exclude services of self-employed individuals or contractors who are working on-site on this organization's R&D projects, which should be reported in question 8.

Select all that apply.

• Within Canada
• Outside Canada
• No payment made to others to perform R&D

13. In 2025, what were this organization's R&D payments to other organizations within Canada or outside Canada?

Include:

• funding or grants provided to other organizations to perform R&D
• contracted out expenditures for R&D.

Exclude services of self-employed individuals or contractors who are working on-site on this organization's R&D projects, which should be reported in question 8.

Please report all amounts in thousands of Canadian dollars.

Report '0' for no R&D expenditures.

Include payments made through contracts, grants, donations and fellowships to another company, organization or individual to purchase or fund R&D activities.

Exclude expenditures for on-site R&D contractors.

Companies include all incorporated for-profit businesses and government business enterprises providing products in the market at market rates.

Private non-profit organizations include voluntary health organizations, private philanthropic foundations, associations and societies and research institutes. They are not-for-profit organizations that serve the public interest by supporting activities related to public welfare (such as health, education, the environment).

Industrial research institutes or associations include all non-profit organizations that serve the business sector, with industrial associations frequently consisting of their membership.

Federal government includes all federal government departments and agencies. It excludes federal government business enterprises providing products in the market.

Provincial or territorial governments include all provincial or territorial government ministries, departments and agencies. It excludes provincial or territorial government business enterprises providing products in the market.

Provincial or territorial research organizations are organizations created under provincial or territorial law which conduct or facilitate research on behalf of the province or territory.

Other organizations - individuals, non-university educational institutions, foreign governments including ministries, departments and agencies of foreign governments.

14. In 2025 and 2026, does this organization plan to make payments to other organizations to perform R&D?

Include:

• funding or grants provided to other organizations to perform R&D
• contracted out expenditures for R&D.

Exclude services of self-employed individuals or contractors who are working on-site on this organization's R&D projects, which should be reported in questions 10 and 11.

Select all that apply.

• In 2025
• In 2026
• No planned payments to others to perform R&D

15. In 2025 and 2026, what are this organization's planned payments to other organizations to perform R&D within Canada or outside Canada?

Include:

• funding or grants provided to other organizations to perform R&D
• contracted out expenditures for R&D.

Exclude services of self-employed individuals or contractors who are working on-site on this organization's R&D projects, which should be reported in questions 10 and 11.

Please report all amounts in thousands of Canadian dollars.

Report '0' for no R&D expenditures.

Include payments made through contracts, grants, donations and fellowships to another company, organization or individual to purchase or fund R&D activities.

Exclude services of self-employed individuals or contractors who are working on-site on this organisation's R&D projects, which should have been reported earlier in the section "In-house research and development (R&D) expenditures".

Summary of R&D expenditures from 2025 to 2027

16. In-house and Outsourced (contracted out or granted) R&D expenditures from 2025 to 2027

Geographic distribution of in-house R&D expenditures within Canada in 2024

17. In 2025, in which provinces or territories did this organization have expenditures for R&D performed in-house?

Exclude:

• payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 13
• capital depreciation.

Select all that apply.

• Newfoundland and Labrador
• Prince Edward Island
• Nova Scotia
• New Brunswick
• Quebec
• Ontario
• Manitoba
• Saskatchewan
• Alberta
• British Columbia
• Yukon
• Northwest Territories
• Nunavut

18. In 2024, how were this organization's total expenditures for R&D performed in-house distributed by province or territory?

Exclude:

• payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 13
• capital depreciation.

Please report all amounts in thousands of Canadian dollars.

For in-house R&D activities on federal lands, please include in the closest province or territory.

Sources of funds for in-house R&D expenditures in 2024

19. In 2025, what were the sources of funds for this organization's total expenditures for R&D performed in-house?

Include Canadian and foreign sources.

Exclude:

• payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 13
• capital depreciation.

Select all that apply.

Help text:

Funds from this organization

Amount contributed by this organization to R&D performed within Canada (include interest payments and other income).

Federal government grants or funding

Funds from the federal government in support of R&D activities not connected to a specific contractual deliverable.

Federal government contracts

Funds from the federal government in support of R&D activities connected to a specific contractual deliverable.

Provincial or territorial government grants or funding

Funds from the provincial or territorial government in support of R&D activities not connected to a specific contractual deliverable.

Provincial or territorial government contracts

Funds from the provincial or territorial government in support of R&D activities connected to a specific contractual deliverable.

R&D contract work for private non-profit organizations

Funds received from non-profit organizations to perform R&D on their behalf.

Other sources

Funds received from all other sources not previously classified.

Response text:

Funds from this organization

Include interest payments, fundraising and other income.

Companies

Federal government grants or funding

Include R&D grants or funding or R&D portion only of other grants or funding.

Federal government contracts

Include R&D contracts or R&D portion only of other contracts.

Provincial or territorial government grants or funding

From which province or territory did this organization receive provincial or territorial government R&D grants or funding?

Select all that apply.

• Newfoundland and Labrador
• Prince Edward Island
• Nova Scotia
• New Brunswick
• Quebec
• Ontario
• Manitoba
• Saskatchewan
• Alberta
• British Columbia
• Yukon
• Northwest Territories
• Nunavut

Provincial or territorial government contracts

From which province or territory did this organization receive provincial or territorial government R&D contracts?

Select all that apply.

• Newfoundland and Labrador
• Prince Edward Island
• Nova Scotia
• New Brunswick
• Quebec
• Ontario
• Manitoba
• Saskatchewan
• Alberta
• British Columbia
• Yukon
• Northwest Territories
• Nunavut

Private non-profit organizations

Other sources

e.g., universities, foreign governments, individuals

20. In 2025, what were the sources of funds for this organization's total expenditures of [amount] for R&D performed in-house?

Exclude:

• payments for R&D performed by others (e.g., funding grants or contracted out R&D expenditures), which should be reported in question 13
• capital depreciation.

Please report all amounts in thousands of Canadian dollars.

Report '0' for no R&D expenditures.

Funds from this organization

Amount contributed by this unit to R&D performed within Canada (include interest payments and other income).

Federal government grants or funding

Funds from the federal government in support of R&D activities not connected to a specific contractual deliverable.

Federal government contracts

Funds from the federal government in support of R&D activities connected to a specific contractual deliverable.

Provincial or territorial government grants or funding

Funds from the provincial or territorial government in support of R&D activities not connected to a specific contractual deliverable.

Provincial or territorial government contracts

Funds from the provincial or territorial government in support of R&D activities connected to a specific contractual deliverable.

R&D contract work for private non-profit organizations

Funds received from non-profit organizations to perform R&D on their behalf.

Other sources

Funds received from all other sources not previously classified.

Fields of research and development for in-house R&D expenditures within Canada in 2025

21. In 2025, how were this organization's total expenditures of [amount] for R&D performed in-house within Canada distributed by fields of research and development?

Exclude:

• payments for R&D performed by others (e.g., funding, grants or contracted out R&D expenditures), which should be reported in question 13
• capital depreciation.

Please report all amounts in thousands of Canadian dollars.

Report '0' for no R&D expenditures.

Fields of research and development

Medical and health sciences

Basic medicine

Anatomy and morphology (plant science under Biological science), human genetics, immunology, neurosciences, pharmacology and pharmacy and medicinal chemistry, toxicology, physiology and cytology, pathology.

Clinical medicine

Andrology, obstetrics and gynaecology, paediatrics, cardiac and cardiovascular systems, haematology, anaesthesiology, orthopaedics, radiology and nuclear medicine, dentistry, oral surgery and medicine, dermatology, venereal diseases and allergy, rheumatology, endocrinology and metabolism and gastroenterology, urology and nephrology and oncology.

Health sciences

Health care sciences and nursing, nutrition and dietetics, infectious diseases and epidemiology, parasitology and occupational health.

Medical biotechnology

Health-related biotechnology, technologies involving the manipulation of cells, tissues, organs or the whole organism, technologies involving identifying the functioning of DNA, proteins and enzymes, pharmacogenomics, gene-based therapeutics, biomaterials (related to medical implants, devices, sensors).

Other medical sciences

Forensic science and other medical sciences.

Natural and formal sciences

mathematics

• physical sciences
• chemical sciences
• earth and related environmental sciences
• biological sciences
• other natural sciences.

Engineering and technology

• civil engineering
• electrical engineering, electronic engineering and communications technology
• mechanical engineering
• chemical engineering
• materials engineering
• medical engineering
• environmental engineering
• environmental biotechnology
• industrial biotechnology
• nanotechnology
• other engineering and technologies.

Software-related sciences and technologies

• software engineering and technology
• computer sciences
• information technology and bioinformatics.

Agricultural sciences

• agriculture, forestry and fisheries sciences
• animal and dairy sciences
• veterinary sciences
• agricultural biotechnology
• other agricultural sciences.

Social sciences and humanities

• psychology
• educational sciences
• economics and business
• other social sciences
• humanities.

Nature of R&D for in-house R&D expenditures within Canada in 2025

22. In 2025, how were this organization's total expenditures of [amount] for R&D performed in-house within Canada distributed by nature of R&D?

Basic research is experimental or theoretical work undertaken primarily to acquire new knowledge of the underlying foundation of phenomena and observable facts, without any particular application or use in view.

Applied research is original investigation undertaken in order to acquire new knowledge. It is, however, directed primarily towards a specific, practical aim or objective.

Experimental development is systematic work, drawing on existing knowledge gained from research and practical experience and producing additional knowledge, which is directed to producing new products or processes or to improving existing products or processes.

(OECD. Frascati Manual: Proposed Standard for Surveys on Research and Experimental Development, 2015)

Results of R&D expenditures from 2023 to 2025

23. During the three (3) years 2023, 2024 and 2025, did this organization's total expenditures for R&D performed in-house and payments for R&D made within Canada or outside Canada lead to new or significant improvements to the following?

Goods

Goods developed through new knowledge from research discoveries include determination of effectiveness of existing treatment protocols, establishment of new treatment protocols (including diagnostic procedures, tests and protocols), and creation of new service delivery models and reference tools (including electronic applications).

In-house R&D personnel in 2025

24. In 2025, how many in-house R&D personnel within Canada did this organization have in the following R&D occupations?

If this organization is unable to provide a gender breakdown of FTEs, please leave the associated fields empty and report only the totals.

Full-time equivalent (FTE)

R&D may be carried out by persons who work solely on R&D projects or by persons who devote only part of their time to R&D, and the balance to other activities such as testing, quality control and production engineering. To arrive at the total effort devoted to R&D in terms of personnel, it is necessary to estimate the full-time equivalent of these persons working only part-time in R&D.

Full-time equivalent (FTE) = Number of persons who work solely on R&D projects + the time of persons working only part of their time on R&D.

Example calculation: If out of four scientists engaged in R&D work, one works solely on R&D projects and the remaining three devote only one quarter of their working time to R&D, then: FTE = 1 + 1/4 + 1/4 + 1/4 = 1.75 scientists.

R&D personnel

Include:

• permanent, temporary and casual R&D employees
• independent on-site R&D consultants and contractors working in your organization's offices, laboratories, or other facilities
• employees engaged in R&D -related support activities.

Researchers and research managers are composed of:

• Scientists, social scientists, engineers and researchers are professionals engaged in the conception or creation of new knowledge. They conduct research and improve or develop concepts, theories, models, techniques instrumentation, software or operational methods. They may be certified by provincial or territorial educational authorities, provincial, territorial or national scientific or engineering associations.
• Senior research managers plan or manage R&D projects and programs. They may be certified by provincial or territorial educational authorities, provincial, territorial or national scientific or engineering associations.
• R&D technical, administrative and support staff are composed of:
• Technicians and technologists and research assistants are persons whose main tasks require technical knowledge and experience in one or more fields of engineering, the physical and life sciences, or the social sciences, humanities and the arts. They participate in R&D by performing scientific and technical tasks involving the application of concepts, operational methods and the use of research equipment, normally under the supervision of researchers. They may be certified by provincial or territorial educational authorities, provincial, territorial or national scientific or engineering associations.
• Other R&D technical, administrative support staff include skilled and unskilled craftsmen, and administrative, secretarial and clerical staff participating in R&D projects or directly associated with such projects.

On-site R&D consultants and contractors are individuals hired 1) to perform project-based work or to provide goods at a fixed or ascertained price or within a certain time or 2) to provide advice or services in a specialized field for a fee and, in both cases, work at the location specified and controlled by the contracting company or organization.

25. Of this organization's total in-house R&D personnel reported above, what percentage performed software-related activities?

Software-related sciences and technologies

• Software engineering and technology: computer software engineering, computer software technology and other related computer software engineering and technologies.
• Computer sciences: computer science, artificial intelligence, cryptography and other related computer sciences.
• Information technology and bioinformatics: information technology, informatics, bioinformatics, biomathematics and other related information technologies.

Percentage of software-related activities:

26. In 2025, how were the [amount] total in-house R&D personnel distributed by province or territory?

Please report in full-time equivalents (FTE).

R&D personnel

Include:

• permanent, temporary and casual R&D employees
• independent on-site R&D consultants and contractors working in your organization's offices, laboratories, or other facilities
• employees engaged in R&D-related support activities.

Researchers and research managers are composed of:

• Scientists, social scientists, engineers and researchers are professionals engaged in the conception or creation of new knowledge. They conduct research and improve or develop concepts, theories, models, techniques instrumentation, software or operational methods. They may be certified by provincial or territorial educational authorities, provincial, territorial or national scientific or engineering associations.
• Senior research managers plan or manage R&D projects and programs. They may be certified by provincial or territorial educational authorities, provincial, territorial or national scientific or engineering associations.

R&D technical, administrative and support staff are composed of:

• Technicians and technologists and research assistants are persons whose main tasks require technical knowledge and experience in one or more fields of engineering, the physical and life sciences, or the social sciences, humanities and the arts. They participate in R&D by performing scientific and technical tasks involving the application of concepts, operational methods and the use of research equipment, normally under the supervision of researchers. They may be certified by provincial educational authorities, provincial or national scientific or engineering associations.
• Other R&D technical, administrative support staff include skilled and unskilled craftsmen, and administrative, secretarial and clerical staff participating in R&D projects or directly associated with such projects.

On-site R&D consultants and contractors are individuals hired 1) to perform project-based work or to provide goods at a fixed or ascertained price or within a certain time or 2) to provide advice or services in a specialized field for a fee and, in both cases, work at the location specified and controlled by the contracting company or organization.

Full-time equivalent (FTE)

R&D may be carried out by persons who work solely on R&D projects or by persons who devote only part of their time to R&D, and the balance to other activities such as testing, quality control and production engineering. To arrive at the total effort devoted to R&D in terms of personnel, it is necessary to estimate the full-time equivalent of these persons working only part-time in R&D.

FTE (full-time equivalent) = Number of persons who work solely on R&D projects + the time of persons working only part of their time on R&D.

Example calculation: If out of four scientists engaged in R&D work, one works solely on R&D projects and the remaining three devote only one quarter of their working time to R&D, then: FTE = 1 + 1/4 + 1/4 + 1/4 = 1.75 scientists.

Technology and technical assistance payments in 2025

27. In 2025, did this organization make or receive payments inside or outside Canada for the following technology and technical assistance?

Technology and technical assistance payments

Definitions (equivalent to the Canadian Intellectual Property Office - opens in a new browser window)

a. Patent

Government grant giving the right to exclude others from making, using or selling an invention.

b. Copyright

Legal protection for literary, artistic, dramatic or musical works, computer programs, performer's performances, sound recordings, and communication signals.

c. Trademark

A word, symbol or design, or combination of these, used to distinguish goods or services of one person or organization from those of others in the marketplace.

d. Industrial design

Legal protection against imitation of the shape, pattern, or ornamentation of an object.

e. Integrated circuit topography

Three-dimensional configurations of the elements and interconnections embodied in an integrated circuit product.

f. Original software

Computer programs and descriptive materials for both systems and applications. Original software can be created in-house or outsourced and includes packaged software with customization.

g. Packaged or off-the-shelf software

Packaged software purchased for organizational use and excludes software with customization.

h. Databases

Data files organized to permit effective access and use of the data.

28. In 2025, how much did this organization pay to other organizations for technology and technical assistance?

Please report all amounts in thousands of Canadian dollars.

Report '1' for payments made between $1 and $999.

Technology and technical assistance payments

Definitions (equivalent to the Canadian Intellectual Property Office - opens in a new browser window)

a. Patent

Government grant giving the right to exclude others from making, using or selling an invention.

b. Copyright

Legal protection for literary, artistic, dramatic or musical works, computer programs, performer's performances, sound recordings, and communication signals.

c. Trademark

A word, symbol or design, or combination of these, used to distinguish goods or services of one person or organization from those of others in the marketplace.

d. Industrial design

Legal protection against imitation of the shape, pattern, or ornamentation of an object.

e. Integrated circuit topography

Three-dimensional configurations of the elements and interconnections embodied in an integrated circuit product.

f. Original software

Computer programs and descriptive materials for both systems and applications. Original software can be created in-house or outsourced and includes packaged software with customization.

g. Packaged or off-the-shelf software

Packaged software purchased for organizational use and excludes software with customization.

h. Databases

Data files organized to permit effective access and use of the data.

29. In 2025, how much did this organization receive from other organizations for technology and technical assistance?

Please report all amounts in thousands of Canadian dollars.

Report '1' for payments received between $1 and $999.

Technology and technical assistance payments

Definitions (equivalent to the Canadian Intellectual Property Office - opens in a new browser window)

a. Patent

Government grant giving the right to Exclude others from making, using or selling an invention.

b. Copyright

Legal protection for literary, artistic, dramatic or musical works, computer programs, performer's performances, sound recordings, and communication signals.

c. Trademark

A word, symbol or design, or combination of these, used to distinguish goods or services of one person or organization from those of others in the marketplace.

d. Industrial design

Legal protection against imitation of the shape, pattern, or ornamentation of an object.

e. Integrated circuit topography

Three-dimensional configurations of the elements and interconnections embodied in an integrated circuit product.

f. Original software

Computer programs and descriptive materials for both systems and applications. Original software can be created in-house or outsourced and includes packaged software with customization.

g. Packaged or off-the-shelf software

Packaged software purchased for organizational use and excludes software with customization.

h. Databases

Data files organized to permit effective access and use of the data.

Notification of intent to extract web data

30. Does this organization have a website?

• Yes
  Specify the organization website address 1:

  • e.g., www.example.gc.ca

  Specify the organization website address 2:

  • e.g., www.example.gc.ca

  Specify the organization website address 3:

  • e.g., www.example.gc.ca
• No

Notification of intent to extract web data

Statistics Canada engages in web-data extraction, also known as web scraping, which is a process by which information is gathered and copied from the Web using automated scripts or robots, for retrieval and analysis. As a result, we may visit the website for this organization to search for and compile additional information. The use of web scraping is part of a broader effort to reduce the response burden on organizations, as well as produce additional statistical indicators to ensure that our data remain accurate and relevant.

We will strive to ensure that the data collection does not interfere with the functionality of the website. Any data collected will be used by Statistics Canada for statistical and research purposes only, in accordance with the agency’s privacy and confidentiality mandate. All information collected by Statistics Canada is strictly protected.

More information regarding Statistics Canada’s web scraping initiative - this link will open in a new window.

Learn more about Statistics Canada’s transparency and accountability - this link will open in a new window.

If you have any questions or concerns, please contact Statistics Canada Client Services, toll-free at 1-877-949-9492 (TTY: 1-800-363-7629) or by email at infostats@statcan.gc.ca - this link will open in a new window. Additional information about this survey can be found by selecting the following link: Information for survey participants (ISP)

Changes or events

31. Indicate any changes or events that affected the reported values for this business or organization, compared with the last reporting period.

Select all that apply.

• Outsourcing of R&D project(s)
• Initiation of new R&D project(s)
• Completion of existing R&D project(s)
• Major change in funding of R&D project(s) (loss of funding)
• Major change in funding of R&D project(s) (increase in funding)
• Organizational change that affected R&D activities (expansion, reduction, restructuring)
• Economic change that affected R&D activities
• Lack of availability of qualified R&D personnel
• Other reason
  • Specify the other changes or events:
• No changes or events

Contact person

32. Statistics Canada may need to contact the person who completed this questionnaire for further information.

Is [Provided Given Names], [Provided Family Name] the best person to contact?

• Yes
• No

Who is the best person to contact about this questionnaire?

• First name:
• Last name:
• Title:
• Email address:
• Telephone number (including area code):
• Extension number (if applicable):
  The maximum number of characters is 5.
• Fax number (including area code):

Feedback

33. How long did it take to complete this questionnaire?

Include the time spent gathering the necessary information.

• Hours:
• Minutes:

34. Do you have any comments about this questionnaire?

Corrections Population Mortality Dataset: Microdata Linkage of the Canadian Coroner and Medical Examiner Database (CCMED) to the Canadian Correctional Services Survey (CCSS) and Canadian Vital Statistics Database – Death (CVSD) (001-2025)

Productivity of businesses supported by Investissement Québec. (002-2025)

Linkage of the Census of Population to the Integrated Criminal Court Survey (ICCS) and the Canadian Correctional Services Survey (CCSS) to explore the characteristics of people who come into contact with the criminal justice system relative to those who do not. (004-2025)

Exploring differences between Our Health Counts Community Partnered Respondent Driven Sampling Methods to Enumerate First Nations, Metis, and Inuit Populations in Thunder Bay and Kenora and Statistics Canada Population Counts. (005-2025)

This information is collected under the authority of the Statistics Act, Revised Statutes of Canada, 1985, Chapter S-19.

Completion of this questionnaire is a legal requirement under this act.

Confidential once completed

Selon nos dossiers votre langue de préférence est l'anglais, si vous préférez recevoir ce document en français, veuillez nous appeler au numéro sans frais suivant : 1-877-949-9492 ou ATS 1-800-363-7629

Introduction

Survey purpose

This survey collects the financial and operating data needed to develop national and regional economic policies and programs.

Data from this survey are used by the business community, manufacturing associations, federal and provincial departments, and international organizations to:

• profile the manufacturing industries
• undertake market studies
• forecast demand
• develop trade tariff policies.

In addition, businesses use the data to track their performance against industry averages, evaluate expansion plans, and prepare business plans for investors.

Your information may also be used by Statistics Canada for other statistical and research purposes.

Your participation in this survey is required under the authority of the Statistics Act.

Security of emails and faxes

Statistics Canada advises you that there could be a risk of disclosure during facsimile or email. However, upon receipt, Statistics Canada will provide the guaranteed level of protection afforded all information collected under the authority of the Statistics Act.

Note: Our online questionnaires are secure, there is no risk of data interception when responding to Statistics Canada online surveys.

Confidentiality

The Statistics Act protects the confidentiality of information collected by Statistics Canada.

Data sharing agreements

To reduce the response burden, Statistics Canada has entered into data sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes.

Information on confidentiality, data sharing agreements and record linkages can be found on the last page of this questionnaire.

Please return the questionnaire within 21 days.

Please mail the completed questionnaire in the enclosed envelope or fax it to Statistics Canada at 1-888-505-8091.

If you are unable to complete within 21 days OR if you need help, call us at 1-877-949-9492 or TTY 1-800-363-7629.

Statistics Canada
Operations and Integration Division
150 Tunney's Pasture Driveway
Ottawa, Ontario K1A 0T6

Context

The Government of Canada is implementing a comprehensive agenda focused on addressing the causes of plastic pollution and waste along the lifecycle of plastics. The agenda is also being supported by efforts from other levels of government, businesses and community partners. Data on plastics and plastic waste management is necessary to enable the Government of Canada and its partners to measure progress towards its commitments. To this end, we require a comprehensive system of plastics data collection and material flow account to characterize the production, use and fate of materials and products containing plastics in Canada.

Specific plastic resins questions

The questions in this annex were added to the Annual Survey of Manufacturing Industries to get relevant information on plastic resins produced and used by the manufacturing sector. They are an extension of the questions that appear in the 2025 Annual Survey of Manufacturing Industries questionnaires, in the sections titled: Sales of goods manufactured; and Purchases of raw materials and components to be used in manufacturing process. However, this annex only applies if your business sold, or purchased as a raw material or component, one or more of the following resins.

The questions in this annex are only for plastic resins. If your business sold products or purchased raw materials or components other than resins, these should still be reported in the 2025 Annual Survey of Manufacturing Industries.

If you sell or use a plastic resin that is not mentioned in the list above, you can search which category it belongs to by using this Variant of the North American Product Classification System (NAPCS) Canada 2022 Version 1.0 for Manufacturing and Logging - Update 1 (extension variant).

Working your way down from the suggested categories to the different subcategories that match the list above, consult the list of 'All examples' using the links available at the bottom.

Sales of goods manufactured

Please answer the next question for each of the resins mentioned on the previous page. If you sold many of these products, you might need to print this page multiple times.

1. Please provide your sales of goods manufactured by product in thousands of Canadian dollars.

For each product, report sales net of shipping charges by common or contract carriers, discounts, sales allowances, returned sales, sales taxes, and excise duties and taxes. The total net sales for all products should equal the amount reported in revenue section.

Product description:

Product code:

Was this product sold during this reporting period?

• Yes
  • Quantity sold (in kilograms)
  • Value of sales (CAN$ '000)
• No

Please answer the next questions for each of the resins listed below. If you purchased multiple resins, you might need to print the next questions many times.

Purchases of raw materials and components to be used in manufacturing process

This section asks for a breakdown of this business's purchases of raw materials and components. The total cost of purchases for all raw materials and components should match the amount reported in expenses section.

Note: If your only activity is contract logging and your business unit only provides a labour service, this section does not apply to your business.

Product description:

Product code:

1. Was this raw material or component purchased this reporting period?

• Yes
  • Quantity purchased (in kilograms)
  • Cost of purchase (CAN$ '000)
• No

2. Of the total kilograms reported in the previous question, what were the quantities purchased from the following sources?
When precise figures are not available, provide your best estimates.

Virgin resin
Resin produced from nonrenewable fossil fuels, e.g., petroleum or natural gas sources.

1. Virgin resin ... Quantity purchased (in kilograms)

Pre-consumer (post-production) recycled resin
Pre-consumer recycled resin consists of material resulting from a manufacturing process that is diverted from the waste stream. It is the reutilization of materials such as rework, regrind, or scrap generated in a process. It can be reused within the same process that initially generated it or waste material originating (purchased or given) from another facility.

2. Resin recycled within the same process that initially generated it ... Quantity reused or given (in kilograms)
3. Pre-consumer recycled resin originating from another facility ... Quantity purchased (in kilograms)

Post-consumer recycled resin
Post-consumer recycled resin comes from plastic that was used by the end-consumer, and recycled by a recycling facility. If this post-consumer recycled material is a blend of resins, report it in this section only if the resins identified in the Product description are the main component of the blend. The entire amount of the blended post-consumer resins should be reported here (i.e., not just the amount of resins in the Product description.)

4. Post-consumer recycled resin – mechanical recycling source
   Mechanical recycling refers to recovering plastics wastes via mechanical processes (i.e., grinding, washing, separating, drying, regranulating and compounding).. . Quantity purchased (in kilograms)
5. Post-consumer recycled resin – chemical recycling source
   Chemical recycling changes the chemical structure of a polymeric material using processing methods such as high heat, high pressure, solvents and catalysts. The chemical recycling processes includes, but may not be limited to, purification, depolymerisation and decomposition ... Quantity purchased (in kilograms)
6. Post-consumer recycled resin – unknown source ... Quantity purchased (in kilograms)

Bio-based resin
These are resins produced from renewable biomass sources, such as vegetable fats and oils, corn starch, straw, woodchips, sawdust, recycled food waste, etc.

7. Bio-based resin…………………………………………………………Quantity purchased (in kilograms)

Total:
Quantity purchased (in kilograms)
Quantity reused or given (in kilograms)

3. Please provide comments if you have difficulties responding to the previous question or if you would like to provide additional information regarding the product.
Comment box:

Please answer the next questions for each of the resins listed below. If you purchased multiple resins, you might need to print the next questions many times.

Purchases of raw materials and components to be used in manufacturing process

This section asks for a breakdown of this business's purchases of raw materials and components. The total cost of purchases for all raw materials and components should match the amount reported in question 8a. of the Expenses section.
Note: If your only activity is contract logging and your business unit only provides a labour service, this section does not apply to your business.

Product description:

Product code:

1. Was this raw material or component purchased this reporting period?

• Yes
  • Quantity purchased (in kilograms)
  • Cost of purchase (CAN$ '000)
• No

Confidentiality

By law, Statistics Canada is prohibited from releasing any information it collects that could identify any person, business, or organization, unless consent has been given by the respondent, or as permitted by the Statistics Act. Statistics Canada will use the information from this survey for statistical purposes only.

Record linkages

To enhance the data from this survey and to reduce the reporting burden, Statistics Canada may combine the acquired data with information from other surveys or from administrative sources.

Data-sharing agreements

To reduce the response burden, Statistics Canada has entered into data-sharing agreements with provincial and territorial statistical agencies and other government organizations, which have agreed to keep the data confidential and use them only for statistical purposes. Statistics Canada will only share data from this survey with those organizations that have demonstrated a requirement to use the data.

Section 11 of the Statistics Act provides for the sharing of information with provincial and territorial statistical agencies that meet certain conditions. These agencies must have the legislative authority to collect the same information, on a mandatory basis, and the legislation must provide substantially the same provisions for confidentiality and penalties for disclosure of confidential information as the Statistics Act. Because these agencies have the legal authority to compel businesses to provide the same information, consent is not requested and businesses may not object to the sharing of the data.

For this survey, there are Section 11 agreements with the provincial and territorial statistical agencies of Newfoundland and Labrador, Nova Scotia, New Brunswick, Québec, Ontario, Manitoba, Saskatchewan, Alberta, British Columbia and the Yukon.

The shared data will be limited to information pertaining to business establishments located within the jurisdiction of the respective province or territory.

Section 12 of the Statistics Act provides for the sharing of information with federal, provincial or territorial government organizations.

Section 12, you may refuse to share your information with any of these organizations by writing a letter of objection to the Chief Statistician, specifying the organizations with which you do not want Statistics Canada to share your data and mailing it to the following address:

Chief Statistician of Canada
Statistics Canada
Attention of Director, Enterprise Statistics Division
150 Tunney's Pasture Driveway
Ottawa, Ontario
K1A 0T6

You may also contact us by email at infostats@statcan.gc.ca or by fax at 1-514-496-4879.

For all manufacturing industries — there are Section 12 agreements with the statistical agencies of Prince Edward Island, Northwest Territories and Nunavut, as well as with the New Brunswick Department of Environment and Local Government, the Quebec Forest Industry Council, the Ontario Ministry of Energy and Mines, Manitoba Agriculture, Manitoba Economic Development, Investment, Trade and Natural Resources, the Saskatchewan Ministry of Energy and Resources, the British Columbia Ministry of Forests, British Columbia Ministry of Agriculture and Food, Agriculture and Agri-Food Canada, Environment and Climate Change Canada, Natural Resources Canada the Canada Energy Regulator and Housing, Infrastructure and Communities Canada.

For establishments in non-ferrous metal (and aluminum) smelting and refining, clay building material and refractory manufacturing, cement manufacturing and lime manufacturing — there are Section 12 agreements with the Newfoundland and Labrador Department of Industry, Energy and Technology, the British Columbia Ministry of Mining and Critical Minerals and the British Columbia Ministry of Energy and Climate Solutions.

Authorized disclosure

Section 17 of the federal Statistics Act allows for the disclosure of a list of individual establishments, firms or businesses showing information including the establishments' names and locations (province, territory and municipality) and North American Industrial Classification System (NAICS) codes. The disclosure of these lists may be authorized in order to aid analysts in the interpretation of the data from the Annual Survey of Manufacturing Industries.